LPS® TKX Lubricant

TKX all-purpose penetrant, lubricant and protectant. Excellent all-purpose lubricant. Displaces moisture, loosens rusted or frozen parts. Protects against corrosion. High flash point of 79°C. Does not contain chlorinated solvents or silicones. Non-conductive. Safe on most surfaces. Inverta spray valve.

LPS® Heavy-Duty Rust Inhibitor

The long term, heavy- duty corrosion inhibitor. Protects and lubricates in even the harshest environments. CFC-free, non-flammable and non-conductive with a transparent waxy film. Protects up to two years. Approved by Boeing, McDonnell Douglas, Airbus Industries and Gulfstream.
USDA approved.

LPS3

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

LPS® A-151 Solvent Degreaser

This high flash point solvent penetrates quickly removing oil, grease, corrosion inhibiting compounds and other contaminants. A-151 has a flash point of 175°F (79°C) which allows it to be used in areas where flammability poses a potential problem. A-151 is also ideal for dip tanks. It does not contain any chlorinated solvents and is safe to use on most surfaces. NSF C1 registration 059811: (aerosol); 059812: (bulk).

LPS® Solvent/Degreaser

Excellent for cleaning grease and oil on machines and equipment. With a high flash point of 104°F (40°C), F-104 is an excellent alternative to extremely flammable cleaners. It removes contaminants in seconds without leaving a residue. It does not contain chlorinated solvents, is safe to use on most surfaces and is non-conductive.

F-104 Fast Dry

LPS® Electro Contact Cleaner

Fast drying CFC free, cleans and degreases delicate precision mechanisms with its fast penetrating action to remove oil, grease, dirt, flux and other contaminants. CFC free is safe on metal and plastic, is fast evaporating, does not leave a residue and does not contain HCFCs. NSF K2 registration #059813 (aerosol).

LPS® Tapmatic TriCut Cutting Fluid

Features:
Excellent for stainless steel and other hard to machine metals
Not recommended for aluminum
Provides smooth, accurate cutting action
Flows directly to cutting edge
Extends tool life
Improves surface finish
Allows increased removal rates
Reduces friction
Suitable for high and low speed applications
Non-corrosive to steel

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

LPS® Greaseless Lubricant

The fine lubricant that penetrates, dries fast and will not attract dust or dirt. Inhibits corrosion by providing a light greaseless film. Lubricates, cleans and protects delicate mechanisms. CFC-Free. Non-flammable propellant. Non-conductive. Dissolves grease and oil. USDA approved.

LPS1

LPS® LPS Cleaner/Degreasers ZeroTri

A fast acting & fast evaporating solvent, alternative to 1,1,1 (Trichloroethane). Removes oil, grease, dirt, brake fluid, inks, oversprayed paint etc. in seconds. Non-conductive. Flammable. USDA approved.