Kennedy® Reamer Stone

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Aluminium Oxide

190mm Circular Saw

Max. Cut at 90: 66mm. Max. Cut at 45: 46mm. Blade Diameter: 190mm. Bore Diameter: 30mm. Input Wattage: 1,200W. No Load Speed: 4,900rpm. Weight 4.6kg. Available in 110V and 240V.

5704RK

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Heavy Duty (Pack 5)

Capacities: Steel 1.5 - 4.0mm, Aluminium 1.5 - 4.0mm, Plastics 8.0mm. Tooth pitch: 1.2. Effective length: 50mm. Wavy set teeth. Equivalent to Wolf 91484.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Rapid Stock Removal

Kobe? Suction Feed Air Spray Gun

For Industrial and automotive use. Large responsive trigger, adjustable width of spray and flow control adjustment. Quick release bayonet fitting canisters.
Specifications:
Max operating pressure: 4 - 8 bar.
Air consumption: suction feed 150 - 250ltr/min.

Kennedy® Tie Cord Bonnet Support Pads

High quality 23mm foam pads with rigid back plates. For use with all tie cord bonnets. Bonnets supplied separately. Max 2500rpm. (125mm and 150mm pads are dual purpose - also for use with Velcro bonnets or foams).

Bonnet diameters available: 125mm, 150mm, 180mm, and 200/225mm.
Thread sizes: M14 x 2 and 5/8" UNC.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Hitachi Router

M12SA2
Powerful 2000W motor (230V). Revolutionary new fan design offers increased cutting efficiency to rout smoothly through hardwoods. All new ergonomic design with soft grip handles. New fast and accurate depth adjustment mechanism with metric & imperial scales. Fine height adjuster for easy adjustment when used with a bench stand. Improved collet chuck ensures bits are held securely.

Specifications:
Capacity: Collet Chuck: 12.7mm (1/2").
Power input: 2000W.
No load speed 22000/min.
Plunge depth 65mm.
Height: 360mm.
Weight: 6.2kg
Supplied with: straight guide with micro adjuster, 1/4" collet, centering gauge, template guide & adapter, dust extraction adapter.

Available in 230V and 110V.

Makita Rotary Hammer drills

Makita HR2600 series models are 26mm (1") Hammer drills with a chuck adapted for SDS-PLUS shank bits. Features compact and lightweight tool design, ergonomic handle and many other features designed for more comfort and better control.

HR2600 26mm Rotary Hammer Drill SDS+

HR2600 Hammer Drill Specifications:
No Load Speed: 0-1200rpm.
Blows per minute: 0 - 4600ipm.
Impact energy per stroke: 2.9Js.
Vibration: Hammer Drilling: 15.5 m/sec².
Input Wattage: 800w
Drilling Capacity (Max)
Wood: 32mm.
Steel: 13mm.
Concrete (TCT bit): 26mm.
Concrete (TCT core): 68mm.
Concrete (Diamond core): 80mm.
Net weight: 2.8kg.

Features Include:
Double Insulation.
Variable speed.
With reversing function.
Torque limiter: The drill stops when the bit hits against reinforcements.
Improved dust collection.

110V Order code: MAK-275-6382G
240V Order code: MAK-275-6382H

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Capacities(mm): Aluminium:10.0. Plastics: 20.0. Tooth Pitch: 2.0. Effective length: 75mm. Tapered & ground. Equivalent to Bosch T101A.