York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Makita Die Grinders

GD0600
Ergonomically designed slim body for grinding in tight spots. Internal labyrinth construction seals motor and bearings from contamination.

Specifications:
Collet capacity: 6mm.
No load speed: 25,000rpm.
Input wattage: 400w.
Dimensions: 285 x 74 x 74mm.
Weight: 1.7kg.
Supplied with: Hex wrench 13 x 2.

Available in 240V and 110V.

Kobe? 1" Drive Heavy-Duty Pistol Grip Air Impact Wrench

Front or rear mounting spring balance loop. Easy to use forward/reverse switch and 3 position power regulator. Forward facing exhaust. Oiling points for daily maintenance.

Specifications:
Safe working pressure: 90psi (6.2 bar).
Free speed: 3,400rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,170Nm (1600lb.ft).
Maximum torque: 2,440Nm (1800lb.ft).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2"(13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 5.95CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9 m/s2.
Overall length: 295mm.

Heat Gun Accessories

For welding tarpaulin, ground sheets etc.
Made from stainless steel. Used in
conjunction with the 9mm Reduction Nozzle
KBE-298-3807S.

Slit Nozzle 20mm

Zirconium Abrasive Flap Discs

'JET Zirkon' Zirconium abrasive discs with intergrated M14 adaptors for quick mounting and reinforced glass fibre backing with 'cooling slots' for air-cooling. Fully resinoid bonded with fillers for active grind support. Self-sharpening ceramic grain for extremely high stock removal as well as a long service life.

J-AZA

3M Scotch-Brite? Surface Conditioning Belts

For removing grinding marks and scratches leaving a greatly improved surface finish.

Hook and Loop Backed

For use with a regular (sanding disc) flexible backing pad.

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding.

Type 1, Plain

Chicago Pneumatic® 10mm (3/8") Quick Change Air Drill

RP9287
10mm (3/8") keyless chuck with direct exhaust from the operator workpiece - very versatile. Good productivity and durability. Suitable for many applications.
No load speed: 2.900rpm.
Chuck capacity: 10mm (3/8").
Maximum torque: 5.3Nm (3.91 ft-lbs).
Noise level: 89dB(A).
Vibration: 2.5m/s2.
Length: 199mm (7.83").
Weight: 1.15kg.

Kennedy® Router Cutters

To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 10mm

Shape W244. Grade: RA46. Diameter: 50mm. Length: 50mm. Max. rpm: 11,000. Weight per 10: 2670g.