Dronco Diamond Cutting Blades

Dry or wet cutting diamond disc which is a laser-welded all-purpose segmented disc designed to cut construction-site materials. For use on concrete, exposed aggregate concrete, border stones.

LT46 Diamond Cutting Discs

PCL Tyre Inflation Equipment

Diecast lightweight body with pressed steel trigger. Replaceable valve assembly requires less maintenance. Impact absorbing rubber bumper and magnified scale for easy reading. Hose length of 53cm and body length of 270mm x 50mm. Scale: 0-140psi/0-10 bar. Each gauge is supplied with a certificate of calibration and operating instructions. Comply with EC directive 86/217/EEC (bar scale only).

Mk 3 Air Line Gauges

Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiMh Batteries - ?Plug-In? Type

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

Combi Drill

14.4 volt Combi Drill

No load speed 0-1300/0-400rpm
Blows per minute: 19500/600bpm
Max. drilling capacities: steel 10mm, wood 25mm, masonry 10mm
Max. size of woodscrew: No14
Weight 1.7kg

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Taper Type

Tapered for angles, corners and irregular or concave surfaces.

York? Surface Conditioning Discs

For removing grinding marks and scratches leaving a greatly improved surface finish.

Fibre Backed

For use with a regular (sanding disc) flexible backing pad.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W173. Grade: RA80. Diameter: 10mm. Length: 3mm. Max. rpm: 70,000. Weight per 10: 30g.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)19mm x (W)25mm.

Nilfisk ALTO Industrial Pressure Washers

The Poseidon 5 from Nilfisk Alto is a Medium-size mobile cold water high pressure washers. Ideal for cold water cleaning tasks in all sectors. The robust and stable design
make the Poseidon 5 suitable for use in even the toughest environments.

Poseidon 5 Industrial Cold Water Pressure Washer

Poseidon 5 Specifications:
Voltage: 230V.
Motor rated power: 2.9kW.
Pistons: 3 Ceramic.
Max. water flow: 770ltr/hr.
Detergent tank: 6ltr.
Pump pressure: 100 bar.
Maximum inlet temperature: 60C.
Dimensions (LxWxH): 740x550x1015mm.
Weight: 70kg.

Bosch Die Grinders

GGS28 short design, also suitable for left-handers.
Little servicing required due to significantly
improved carbon brush lifetime.

GGS28 Straight Die Grinder

Max. disc dia.: 50mm
No load speed: 28,000rpm.
Collet size: 8mm.