3M Scotch-Brite? Clean & Finish Rolls

A Scotch-Brite roll designed for light cleaning, finishing and deburring operations. Available in very fine grades for even finer finishes. The roll can be easily torn to convenient lengths. Available in 10M rolls in a choice of 100mm, 125 and 150mm widths.

Kennedy® Router Cutters

Cutter for deep mortising and grooving. Staggered cutting edges give good chip clearance enhancing quality of cut.

Two Flute Staggered Tooth Bits

Trade Medusa Generators

Compact and powerful, with integral carrying handle. Quiet running (72dB(A)), four stroke engine. Low oil shutdown. Three pin UK socket outlet, 12V DC battery charging facility. One year warranty. 5.5 litre tank, 8hrs running time, quiet running, four stroke engine, maximum output 1000W. Complete with two stroke oil, battery charger, leads and clips, spark plug socket and screwdriver set.

04739 Trade Medusa Compact T1000

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Rolls

Dronco Flap Discs

Used for descaling and derusting of stainless steel, steel, aluminium and non-ferrous metal. Preparation and finishing of welding seams, preparing of painted surfaces and polishing of stainless steel. For use with a grinder.

Polishing Flap Discs

Available in 2 sizes: 115mm x 22mm and 125mm x 22mm.

York? Flap Wheel Sets

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

5 Piece - 6mm Shank

Contents: 30 x 15mm: P80, 40 x 15mm: P80, 50 x 15mm: P60, 50 x 20mm: P80, 60 x 30mm: P60.

3M Green Corps? Flexible Grinding Discs

A range of Green Corps? flexible grinding discs which provide a fast cut smooth finish on a variety of metals. They can offer substantially reduced levels of vibration when grinding. Ideal for weld grinding, de-scaling, heavy deburring and deflashing of flame cut parts. To be used with back-up pads.

Grinding Disc Kits

Contents: 20 Discs plus 2 Back Up Pads.

Heat Gun

Four memory settings. Precise airflow and temperature control. Cold setting can be set for cooling heating element(approx. 1 minute). Removable dirt filter for cleaning. Ergonomic design/softgrip. Accessories: surface nozzle 50mm, glass protection nozzle 75mm and carrying case. Working temperature: 50° - 660°C. Power input: 2,300W. Airflow: 250 - 500 l/min.

GHG 660LCD

Kennedy® 4-Way Ultra Slim Socket Extension

4-way. 240V. 3M cable. Allows appliances not exceeding 13 amps to be plugged into 1 socket outlet. Conform to BS 1363 Part 1: 1995.

York? Mandrels

For use with Cartridge Rolls. This steel adaptor is used to secure and hold both tapered and parallel sided cartridge rolls to air grinders or electric drills. This holder is used by sliding the cartridge roll onto the mandrel pilot until the bottom of the abrasive touches the threaded steel area. Simply screw the cartridge roll onto the threads to secure. Your mandrel should be at least 13mm longer than your cartridge roll.