Kobe Drill Sets

This two piece drill set from Kobe contains:

A tungsten carbide tipped tile and glass drill bit for drilling through glass, tiles, mirrors and ceramics. Suitable for use with most hand held power drills, operates in rotary mode only with hammer action switched off. Use water to cool the drill tip.

A tungsten carbide tipped masonry drill bit for prolonged life and heavy-duty use, with a flute design for fast and effective waste removal.

Tile and Masonry Drill Bit Set

Available in a range of diameters:
5.00mm Order Code: KBE-280-7500K.
6.00mm Order Code: KBE-280-7510K.
6.50mm Order Code: KBE-280-7520K.
7.00mm Order Code: KBE-280-7530K.
8.00mm Order Code: KBE-280-7540K.

36V Cordless Combi Drill/Driver (NAKED)

With the Bosch high performance motor, the two-stage planetary gears and the new 36V lithium-ion battery (not supplied), the tool offers levels of torque that could hardly be any more extreme and this in any speed range. Supplied with 1.5 - 13mm keyless quick change chuck and heavy duty carrying case.

GSB36V - 36V Li-ion

With the Bosch high performance motor, the two-stage planetary gears and the new 36V lithium-ion battery, offers levels of torque that could hardly be any more extreme ? and this in any speed range. No load speed: 0 - 450/1500rpm. Max. impact rate: 18,000. Torque, hard/soft: 80/34Nm. Max. drilling capacities: wood 50mm, steel 16mm, masonry 16mm. Max. screw diameter: 12mm. Battery capacity: 2Ah. Charge time: 45 minutes.

Naked Tool Only - Batteries and Charger are supplied separately.

Velcro Backed Sanding Discs

No spanners required. 100% of disc can be used, material removal rate is therefore increased. Can be repeatedly removed and re-applied. Silicon carbide abrasive epecially suitable for automotive body preparation prior to spraying and for cutting back two-pack paint finishes. Can be used wet or dry.



75mm (3"). Pack 25

Bosch Jigsaw Blades

Application: Clean cutting. Hardwood, softwood, plywood, blockboard & plastic 25mm. Taper ground teeth. Effective length: 75mm. Pitch: 2.5.

Carbon Steel For Wood & Plastics (Pack 5)

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

127mm Dia x 22mm Bore 12,000 MOS (rpm).

Wet & Dry Vacuum Cleaner

70ltr stainless steel tilt or lift-out container. Automatic filter cleaning. Washable PET Fleece filter element. Low working noise level lets the operator work when others are nearby, without disturbance. Automatic on/off models are the choice for operators who use the machine with electric hand tools because starting or stopping the tool starts and stops the vacuum, as well. An airbox is available as an accessory which performs the same function when using pneumatic tools.
Specifications: Air flow rate: 3600ltr/min. Vacuum: 230/23mbar/kpa. Power: 1500W. Working sound level: 57dBA. Container volume: 70ltr. Dimensions (L x W x H): 605 x 580 x 970mm. Cable: 7.5m.

Attix 751-11

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kobe™ Extended Spindle Die Grinder

FDG180e
For polishing, buffing, deburring and grinding. Rubber handle provides grip and operator comfort. Extended head for flexibility in tight areas. Speed regulator. Safety release throttle. Rear exhaust. Ball bearing construction for long tool life.

Box contents: Extended die grinder, two collet spanners and a comprehensive instruction manual.

Specifications:
Free speed: 25,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8" (10mm).
Air pressure: 90PSI/6.2Bar.
Air consumption: 4CFM*.
Sound pressure level: 91dB(A).
Sound power level: 98dB(A).
Vibration level: 4.53m/s2.
Overall length: 253mm.
Net weight: 657gm.

*Based on a 15 second cycle per minute average use.

Nilfisk Alto Cold Water Pressure Washer C130.1-6 X-TRA (with hose coil)

Nilfisk ALTO Domestic Pressure Washers are Compact and lightweight suitable for basic outdoor cleaning tasks. CLICK & CLEAN (C&C) nozzle system ensures quick and easy changes.
Features Include:
Automatic start/stop.
Reliable aluminium pump.
Compact and easy to store.
Cable length: 5m.
Voltage: 230V.
Motor rated power: 1.7kW.
Max. water flow: 520ltr/hr.
Pump pressure: 120 bar.
Hose length: 6m.
Max. inlet temp.: 40C.
Dimensions (L x W x H): 280 x 250 x 850mm.
Weight: 9.2Kg
Supplied with: Powerspeed and Tornado PR nozzles.

Makita Batteries for Cordless Tools

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

NiMh Batteries - ?Plug-In? Type