Kennedy® Wet or Dry Silicon Carbide Paper

Silicon Carbide is waterproof-resin bonded to paper suitable for wet and dry production polishing and finishing of a wide range of materials including metals, plastics, paintwork, ceramics etc.

Wet or Dry Paper Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez D.S. Medium/Soft Aluminium Oxide

This is a popular, fast-cutting stone which does not load easily. Good for all dies and moulds. Length: 150mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W176. Grade: RA60. Diameter: 10mm. Length: 13mm. Max. rpm: 45,000. Weight per 10: 50g.

Excel Heavy-Duty Bandsaw

Micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable Speed: No belt change. No time wasting. Speeds up production.

Standard Accessories:
Coolant pump & accessories.
Instruction manual.

Optional Accessories:
Single roller stand 1-625-994 MSR4 4 Roller adj. stand 0335-7610.

Specifications:
Maximum capacity:
@ 90 - round 250mm, square 250 x 250mm, rectangular (H x W): 250 x 415mm.
@ 45 - round 190mm, square 190 x 190mm, rectangular (H x W): 250 x 190mm.
Vice capacity: 450mm.
Blade size: 3300 x 27 x 0.9mm.
Blade speed - stepless: 25-75m/min.
Mitre cut: 45.
Motor: 2hp.
Weight: 325kg.
Dimensions (L x W x H): 1750 x 575 x 1120mm.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Oval Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

3M Stikit™ Discs 245

Stiff E-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature "burning". For initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Use on: Wood, Metal, Paints, Fillers, Plastics.
Mineral: Aluminium Oxide.
Backing: E Weight Paper.
Coating: Open.
Bond: Resin.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

Kobe? Retainers

Suitable for use with all Kobe air hammers.

Zip Change Type

Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)50mm x (L)25 Metres. Available in several grades.

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Ultra Thin Metal/Inox AA46 T (C45) Cutting

For steel/stainless steel. Thin sheet applications. Comfortable cutting, Burr-free cutting result. High stability. Free of iron, sulphur and chlorine. Made of semi-precious corundum. Box quantity 25.