Kennedy® Spare Halogen Bulbs

Halogen. Suitable for use with all standard PIR lights mini-pod floodlights, tripod site lights etc.

Halogen Tube Bulbs

Hitachi NiCd Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

EB1220BL 12.0V Battery 2.0AH NiCd

Charger compatibility: UC35SFL, UC18YRL/J0 and UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Kennedy® Aluminium Oxide Cloth

Superflex Aluminium Oxide is resin bonded over resin on a very flexible J-weight blue twill cloth. Moisture resistant and electrostatically coated for polishing flat and contoured surfaces of most materials.

Rolls

Roll size: (W)25mm x (L)50 Metres. Available in several grades.

Bosch 9" Anti-Vibration Angle Grinders

GWS 22-230LVI
Unbeatable light! 20% less weight with 100% power. KickBack stop for maximum user protection in case of a disc jam. Soft start is convenient and limits the starting current. Burst proof quick adjustable guard for superior convenience and protection. New vibration control side handle with soft pads - the perfect grip. New 2200W low weight Champion motor. Softgrip for better handling. Restart protection for superior user protection if switch is on after power interuption. Vibration control main handle double damping.

Specifications:
Rated power: 2200W.
No load speed: 6500rpm.
Disc diameter: 230mm.
Weight: 5.3kg.
Disk supplied separately.

Available in 240V and 110V.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Hitachi 8" Sliding Compound Mitre Saw

C8FSE
Twin horizontal rails give a maximum cutting width of 312mm. Left bevel cutting up to 48. Lightweight design. Soft grip handle.

Specifications:
Blade diameter: 216mm.
Bore size: 30mm.
Max. cut depth cross cut: 65 x 312mm.
Mitre cut (45°L/R): 65 x 220mm.
Bevel cut (45°L): 45 x 312mm.
Max compound cut: 45 x 220mm.
Power input 1050W.
No load speed: 5500/min.
Weight: 14.0kg.
Supplied with: 24 tooth TCT saw blade, dust bag, vice assembly and wrench.

Available in 240V and 110V.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W151. Grade: RA120. Diameter: 5mm. Length: 3mm. Max. rpm: 100,000. Weight per 10: 20g.

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Taper Type

Tapered for angles, corners and irregular or concave surfaces.