SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06278 Airmate PB3800B/150S

Specifications:
3.0 hp motor, 230V (13amp) supply.
150 litre air receiver.
Piston displacement 14.0CFM, max. pressure 10 bar.

Trend HSS Snappy Drill Countersinks - SNAP/CS

Snappy drill-countersinks have 1/4" hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.



Drill Diameter; 1/8" (No.10 Screw)

110V Open Drum Cable Reels

Polycarbonate drum and guide walls. Arctic grade cable. Maximum load 16A/1760W. Conforms with BS 5733.

Chargers for Cordless Tools

Additional chargers used in conjunction with extra batteries offer the advantage of continuous tool use while original batteries are charging, therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines and circuit board manufacturing.

Kobe Powertool Battery Chargers

Charger to suit Kobe (ASB 12 VET-2) 12V batteries.

Kennedy® Linisher Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



25mm (1") Wide x 1065mm (42") Long.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10's 6's. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 50mm Height 7,700 MOS (rpm)

Trend Router Cutters

For drilling slotting, cutting aluminum anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes.

Single Flute Helical

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.