Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Kobe Multi-tool Accessories.

Flexible rubber drive shaft for use where maximum flexibility is required, to improve access in confined spaces.

Flexible drive shaft.

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W236. Grade: RA46. Diameter: 38mm. Length: 13mm. Max. rpm: 25,000. Weight per 10: 430g.

PCL Accura 1 Tyre Inflator

The Accura 1 is a robust yet sophisticated handheld electronic tyre inflator designed to break the mould of existing handheld tyre inflation. With leading electronics and sensor technology as well as patented software algorithms it offers fast, accurate and trouble-free tyre inflation and deflation. Robust electronic design with a modern, lightweight and shock resistant construction. Clear and easy to read digital display with a ceramic sensor and a built-in swivel and hanging device. Proprietary software increasing accuracy, fine metering and eliminating the chance of false readings. Direct valve design increasing inflation and deflation rates with an over pressure warning if pressure exceeds 12 bar / 174 lbf/in / 1200 kPa. Individually tested and certified, exceeds EC Directive 86/217/EEC.

Specifications:
Accuracy: Exceeds EC Directive 86/217/EEC.
Reading accuracy: 0.01bar / 0.2 lbf/in / 1kPa.
Maximum inflation pressure: 15bar / 218lbf/in 1500kPa.
Inflation range: 12bar / 174lbf/in / 1200kPa.
Operating temperature: -20C to 60C.

DAC1A03

530mm hose length, twin hold-on Type inflator.

Glue Sticks.

For use with industrial and standard glue guns. Clear 6330: Provides a translucent bond in seconds. For use on metals, stonework, cardboard and fabric. Can also be used on flexible materials such as plastic.



5kg Box

Kennedy® Abrasive Files

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Round Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® RCD Adaptor

Offer portable protection against electrocution, 240V.



The RCD adaptor fits between an appliance plug and the power supply socket.

Straight Continuous Use Die Grinder 1/4? - 25,000rpm

B3456
Use for grinding, polishing, buffing and deburring. Reversible hardened steel 1/4? collet. Short body length allowing access into hard to reach areas. Planetary gears for longer life and smoother running. Low profile teasing throttle for precise speed control. Rotating air inlet to prevent the air hose tangling.

Specifications:
Model number: B3456.
Drive size: 1/4? (6mm), 1/8? (3mm).
Free speed: 25,000rpm.
Air pressure: 6.2Bar (90PSI).
Air consumption: 4CFM* (113ltr/min).
Air inlet thread: 1/4? NPT.
Minimum air hose size (ID): 10mm (3/8?).
Noise level?: 91dBA.
Sound power level?: 98dBA.
Vibration level#: 4.53m/s2.
Overall length: 160mm.
Weight: 0.6kg.

? Per Pneurop Standards EN 12366.
# Per EN 28927-1.

Action shots:
Vibration dampened rubber grip.
Adjustable air(speed) regulator.
Lever operated throttle with safety clip.
Comes with 1/4? and 3/8? collet spanners.

Kennedy® Router Cutters

Tungsten carbide tipped cutters to cut slots in rails to accept panels or for cutting slots in frames and doors for 'weather' feature fittings. Arbors are supplied separately.

Three Tooth Slotting/Biscuit Jointing Cutter