Bosch Hammer Drills

The Bosch PSB 650RE hammer drill has speed pre-selection and control using a setting wheel and trigger switch for material specific working.

Bosch Press+Lock keyless chuck ? easy tool changes due to drill spindle locking at the push of a button.

Supplied complete with auxiliary side handle, depth gauge and carry case.

PSB 650RE 13mm (1/2??) Hammer Drill

PSB 650RE Specification:
Power input: 650W
No-load speed: 50?3,000rpm
Maximum drilling Capacities:
Concrete: 14mm
Steel: 12mm
Wood: 30mm

2-Speed LXT Drill/Driver - Super Charge

No load speed: 1300/400rpm.
Capacities: steel 10mm, wood 25mm.
Battery:
1x 1.5Ah Li-ION.
Charing time: 15min.

York? File Belts

Suitable for a wide range of power tools. Aluminum oxide designed for a wide range of materials including metal, steel, aluminium and non-ferrous metals.



20mm Wide x 480mm Long.

3M 618 Anti-loading Silicon Carbide Paper

Sharp silicon carbide mineral gives an aggressive cut with fine finish. Higher loading resistance means extended product life. For hand sanding or random orbital sanding on furniture, ornaments, frames, fillers, mouldings, profiles. Use on lacquers, plastics, primer coats, fillers, wood.
Mineral: Silicon Carbide.
Backing: A-weight Paper.
Coating: Open.
Bond: Resin.

Sheets

A flexible 'A' weight high performance silicon carbide sheet. Ideal for finishing paints and lacquers, wood and plastics. Size: (W)230mm x (L)280mm.

Replacement Bulb for plasterers light

Tripod type: folded.
Rating: 18W.
Length: 600mm.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein DF Medium/Soft Aluminium Oxide

This is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length 100mm.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade C24. For use on stone and non-ferrous materials.

Kennedy® Portable Sander Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 610mm (24") Long.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

3M Premium Cubitron™ Fibre Discs

985C
3M's premium blended Cubitron™ disc. Superior performance in all metal grinding applications. More aggressive cut and longer life than 3M 785C discs. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)