Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Pointed Tree

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Senator® Router Cutters

For profiling, rebating and through slotting.

Straight Trimming Bits

1/4" Shank.

Bosch Jigsaw Blades

Application: Mild steel 3 - 6mm. Non-ferrous metal, aluminium, aluminium alloy 3 - 10mm. Wavy set & milled teeth. Effective length: 50mm. Pitch: 2.0.

All Hard HSS For Metal (Pack 5)

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B64. Grade: RA120. Diameter: 6mm. Length: 2mm. Max. rpm: 100,000. Weight per 10: 20g.

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

Kobe™ 10mm Air Pistol Drill

DP2210
10mm Jacobs chuck, stall resistant, heavy duty bearings, 1/2" HP motor, 3/8" - 24 spindle thread.

Specifications:
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 3/8"(10mm).
Chuck capacity: 10mm.
Spindle thread: 3/8" - 24.
Air pressure: 90PSI/6.3Bar.
Air consumption: 4CFM* (144 ltr/min).
Sound pressure level: 87dBA.
Sound power level: 103dBA.
Vibration level: 1.5m/s2.
Overall length: 165mm.

*Based on a 15 second cycle per minute average use.

Hitachi 18V Combi Drill

33% increase over previous battery capacity.
Multiplex protection circuit for maximum battery life.
Same size and weight as 3.0Ah Li-Ion battery.
Extremely high maximum torque of 92Nm.
Lightweight slide-in Li-Ion batteries.
2 speed gearbox to suit most applications.
Raised body mouldings for extra protection against dust
and dirt.
Slimline soft grip handle.
Forward and reverse switch.
White LED spotlight illuminates workpiece.
Battery level indicator.
13mm metal Jacobs chuck with ratcheting lock.
Spindle lock.
Metal belt clip can be fitted for right- or left-handed use.

18V Combi Drill with 2 x 2.0Ah Li-Ion Batteries DV18DSDL/JB

Standard Accessories
2 x BSL1840 high capacity 2.0Ah Li-Ion batteries.
UC18YRSL charger.
Side handle.
Driver bit.
Carrying case.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez R.G. Medium Silicon Carbide

This stone is a mainstay, designed for general use. Length: 150mm.

Kennedy® Router Cutters

For mounting slotting cutters. Optional ball bearing guide which also ensures a constant depth of slot.

Slotting/Jointing Cutter Arbors