Norton Aluminium Oxide Sheets

In the same market-leading material as Norton's "Handy Roll", these high quality aluminium oxide sheets provide excellent flexibility. Ideal replacement for "Emery Cloth."

Sheets

Sheet size: (W)230mm x (L)280mm. Available in several grades.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Kennedy® Bench Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Single Grit Silicon Carbide

For workshop use. Ideal for sharpening chisels, plain iron and virtually any metallic implements. Available in two types.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Kennedy® Abrasive Files

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Round Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® Router Cutters

Cutter for deep mortising and grooving. Staggered cutting edges give good chip clearance enhancing quality of cut.

Two Flute Staggered Tooth Bits

Senator® Glass Paper

Suitable for joinery and general woodworking use. Ideal for surface preparation prior to painting. Size: (W)230mm x (L)280mm. Packs of 50. Several grades available. An assorted pack of 5 mixed grades is also available.

Kennedy® Pin Spanners for Angle Grinders

Several types available. Weight 110g.

Pin Spanner

To suit Kennedy® 100mm pads and most 100mm electric grinders.
Pitch: 20.
Pin diameter: 3.4.

Osaki™ CPW090 Pressure Washer Spares

N.B. Pressure Washer not included.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade A30/A24. For general-purpose use on metals.