Kobe Power Tools

The Kobe HAG200-D hot air gun has three stage air flow and touch button temperature control of between 60 to 600°C, displayed on an LCD display at the rear of the gun.

Suitable for a countless applications such as soldering, welding PVC, shaping, drying, shrink-fitting, stripping paint, removing sticky labels etc.

Features include:
Two metre industrial grade rubber power cord fitted with a 3 pin plug.
Supplied with 4 detachable nozzles and a paint scraper.
Stainless steel nozzle outlet and detachable heat protection sleeve allows for access into narrow areas.
Overheating protection.
Can be used free standing on a work surface facing upwards for hands free use.
Air inlet with lattice guard to keep out foreign matter.
Supplied in a tough blow moulded carrying case.

HAG200-D Hot Air Gun

HAG200-D Specification:
Power Supply: 230V~50Hz.
Input Power: 2000W.
Airflow and temperature:
Stage I 350L/min 60°C (140°F)
Stage II 350L/min 60°-600°C (140-1,112°F)
Stage III 550L/min 60°-600°C (140-1,112°F)
Weight Gun: 910g

Supplied with:
1x Reflector Nozzle.
1x Surface Nozzle.
1x Window Nozzle.
1x Reduction Nozzle.
Paint Scrapper.
Supplied in carry case.

Kennedy® "Ultimate" Merino Sheepskin Bonnets

Genuine 100% sheepskin tie-on bonnets ideal for polishing metal, glass fibre, wood and painted surfaces. With tie cord. 32mm pile. Maximum 2,500rpm - Best results are obtained with a tool speed of 1,500 - 2,000rpm. Not suitable for wet use. Support pad supplied separately.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Ball Shape

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Flexovit Grinding Wheels

A: A particularly tough aluminium oxide providing hard wearing wheels for general purpose, surface and off-hand grinding.

Type 1, Plain

Makita® Drywall Screwdrivers

FS4300
Lightweight aluminium gear housing for durability. Silent synchronized pin clutch for quiet operation. Quick release locator removal. Forward/Reverse rotation. Variable speed trigger. Lock on trigger facility. Rubberized soft grip. Strong metal belt clip. Double insulated. Bit holder. Job light.

Specifications:
Drive shank hex: 1/4".
Capacity drywall screw: 5mm.
Capacity self drilling screw: 6mm.
Torque settings S/H: 10/16Nm.
Noise sound power: 93dB(A).
Noise sound pressure: 82dB(A).
Noise K factor: 3dB(A).
No load speed: 0-4000rpm.
Weight: 1.3kg.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kennedy® Portable Sander Belts

Resin Bond Aluminium Oxide Sanding Belts are designed for industrial applications. Durability combined with flexibility ensures a long life and first class performance. Suitable for wood and metal work.



100mm (4") Wide x 610mm (24") Long.

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

100mm Dia x 16mm Bore 15,300 MOS (rpm).

DeWALT Routers

DeWALT DW625EK Router Specifications:
Power Input: 2000W.
Power Output: 1400W.
No Load Speed: 8000-20000rpm.
Plunge Stroke/Movement: 80mm.
Collet Size: 6-12.7mm.
Max. Cutter Diameter: 50mm.
Weight: 5.1kg.

Supplied complete with:
Parallel fence with fine adjustment.
Dust extraction adapter.
30mm guide bush.
12mm collet (½").
22mm spanner.
Heavy duty carrying case.

Hand/Arm Vibration: 3.1 m/s2.
Uncertainty K 1 (Vibration): 1.5 m/s².
Sound Pressure: 93dB(A).
Acoustic Pressure: 102dB(A).

DW625EK Router

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Straight Type