York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

40mm Dia x 15mm Height 15,300 MOS (rpm)

DeWalt Sliding Mitre Saw

Classic pull saw design improved and updated. Precision machined base and compact internal rail design for accuracy and high cutting capacity. Innovative head lock function restricts the traverse function for trim applications and enables easy transportation. Easy to set up. 110V version includes plug. Spindle lock, blade brake and sliding left hand fence with measuring scale.

Accessories: 24 tooth TCT blade, 2 x bench mounting bolts, blade spanner.

Specifications:
Blade dia. 216mm x 30mm bore.
Weight 14kg.
No load speed 6300rpm.
Max. mitre 50° left and right.
Max. bevel 48° left.
Mitre stops left and right 0, 15, 22.5, 31.6, 45°.

DW777-LX Crosscut Mitre Saw 110V

Power: 1600W.

Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiMh Batteries - ?Plug-In? Type

Charger compatibility: DC1822, DC1804F.

Hermes? Silicone Carbide Abrasive Sheets

Flexible silicon carbide paper for finishing wood, paint, lacquer and plastic. Size: (W)230mm x (L)280mm. Available in several grades.

Kobe? Heavy-Duty Pistol Grip Air Hammer

HP2190
For a wide range of workshop and automotive uses. Supplied with retainer spring. Accepts all standard 0.401" shank tools.

Specifications:
1/4?? NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
Overall length: 225mm.
Stroke length: 90mm.

*Based on a 15 second cycle per minute average use.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical-End Cutting

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T144D)
Application: wood 60mm, plastics 50mm.
Blade: HCS medium duty, tapered and ground.
Tooth pitch: 4.0mm.

Effective length: 75mm.

Pack of 5.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

6 Piece Brazed Turning Tool Set

Rotary Angle Drill

0.5"/13mm industrial class angle drill with head that can be rotated to any angle allowing for use in the most tight of situations. With variable speed at up to 900rpm and a heavy duty keyed chuck, a truly classic professional power tool.

Drilling capacities: Steel 13mm, Wood 38mm
No Load Speed: 400/900rpm
Weight: 3.7kg

Available in 240V and 110V.

Canning-Lippert "G" Quality Mops - Open Type (Soft)

Designed to produce high quality finishes on non-ferrous metals such as brass, copper, aluminium and pewter. Can also be used on plastics for a medium finish. Open type construction for medium polishing pressure. Can be used in conjunction with Hyfin and Steelbrite compositions.



Product Number: 0201-343. Diameter: 10". Width: 2". Weight: 960g.