Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Yellow Line - Coarse

Ripping blades, designed with a low TPI. suitable for cutting long grain solid wood.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T301D)
Application: wood 760mm, plastics 50mm. For cutting curves.
Blade: HCS medium duty, tapered and ground.
Tooth pitch: 4.0mm.

Effective length: 85mm.

Pack of 5.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade C24. For use on stone and non-ferrous materials.

Kennedy® Mini-Pod FloodLight

This compact site light is constructed from diecast aluminium with a steel wire lens guard to prevent contact with the hot lens and protect it against damage. Made from top grade components and wire for industrial heavy duty use.

Mini-Pod FloodLight

Specifications: 500W tungsten halogen bulb. 3M heavy duty cable. Tempered safety glass. Epoxy coated, non-tipping frame. Soft grip rubber handle.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

3 Core S-W-A Cable



Black XLPE3X2/5

Stranded plain annealed copper conductors, XLPE-insulated, PVC-bedding, galvanised steel wire armour, PVC outer sheath. Black. 600/1000V grade to BS5467.
Flame propagation to BS EN60332. Temperature limits: -15 to +90°C. Core identification: 3 core - brown, black, grey. 4 core - brown, black, grey, blue. 2.5 - 2,3,4 core also available in white numbered cores to ESI 09-6. Should not be installed at temperatures below 0°C or
bove +60°C.
Bending radius: 6 x overall diameter. Conductor size: 2.5mm2.
Stranding: 7/0.67mm.
No. of cores: 3.
Weight: 343kg.
Overall diameter: 12.99mm.
Gland size: 20S.
Nylon cleat: 0.6mm.

09276

• 230v (13amp) / 110v supply
• Adjustable 106,995 – 226,000 BTU/hr
(31.4 – 66.2kW) heat output
• Maximum 1574m3 (55,585 cu.ft) approx. heating area
• Low 2.097 – 4.268kg/hr average gas consumption
• Rugged non-corrosive stainless steel casing for tough daily use
• Made in Italy
• 2 Year Warranty
BADGES: Made in Italy, NEW, 2 year warranty, Dual Voltage, Stainless Steel

24V SDS-Plus Hammer Drill DH24DVA/NICD

DH24DVA
High performance drilling, 24mm capacity in concrete. Three mode action, rotary drilling, rotary hammer and roto-stop mode for light chiselling. High drilling speed plus ‘save power' mode to minimise risk of drill breakage when drilling small holes. Compact body with soft grip handle. Push fit bit reception locks drills in place quickly and securely. Cylindrical housing and fan cooled motor for extended durability. Replaceable carbon brushes. Electric feedback and brake.
Chuck type: SDS-Plus.
No load speed: 0 - 520, 0 - 1,050/min.
Impact rate: 0 - 2,200, 0 - 4,500/min.
Impact energy: 2.8 Joules.
Overall length: 322mm.
Battery: 2x EB2420, 2.0Ah NiCad.
Drilling capacities: concrete 24mm, metal 13mm, wood 30mm.
Standard accessories: 2x 2.0Ah NiCad batteries, charger, side handle, depth stop and carrying case.
Weight: 4.1kg.