Kennedy® Wire Wheels & Brushes

For hard to reach areas such as drilled holes, recesses and corners. For removal of burrs, rust and paint. 30 SWG.
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.

Flat End Decarbonising Brushes

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Wire Wheels & Brushes

For use in high speed air and electrical tools. Ideal for hard to reach areas. For the removal of paint, carbon and for de-burring. 6mm Shanks. 30 SWG
Brush manufactured from Steel wire and holder and shank manufactured from galvanized steel.

Pointed End Decarbonising Brushes

Dronco Diamond Cutting Blades

Dry cutting diamond disc which is sintered and segmented designed to cut construction-site materials with a good price/performance ratio. For use on all kinds of construction site material.

ST7 Diamond Cutting Discs

Bosch GSH11VC 11kg Demolition Hammer with SDS Max

Rated power input: 1700W.
Max. impact energy: 23 Joules.
Impact rate at rated speed: 900 - 1700 bpm.
Toolholder: SDS-max.
Vibration level chiselling: 8.0 m/s².
Vibration level drilling/chiselling: 8.0 m/s².
Weight: 11.4kg.
Total shipping weight: 12kg.

Engis Bobs

Spindle diameter: 1/8" except* 1/4". 3mm shank available on request.

Felt Bob

Manufactured from pure wool in a broad variety of sizes, shapes, and degrees of hardness - for any finishing requirement. The mandrels are exactly centered for true-running operation.

Karcher Commerical Pressure Washers

The Karcher HD 6/13 CX+ pressure washer suitable for high performance cleaning of machinery, vehicles or yards on a daily basis. High water flow and pressure rates ensure thorough cleaning results even with stubborn dirt, while the variable pressure and water flow rate ensure quick, efficient results. Featuring a dirtblaster nozzle for faster cleaning of tough dirt, and a three-way nozzle that enables the water jet to be adjusted quickly between a high-pressure pencil jet, a high-pressure fan jet and a low-pressure fan jet. Ideal for fast and tough cleaning jobs on the farm, in the workshop and in car fleets and dealerships.

Features and Benefits:
Integrated hose reel with 15m high pressure hose.
3 piston axial pump with brass water inlet and cylinder head for long service life.
Automatic pressure controlled shutdown upon trigger release for low energy consumption.
Adjustable aluminium push handle provides easy maneuverability and accessory storage.
Easy Press trigger gun, ergonomically shaped to reduce operator fatigue.
Integrated accessory storage on the back of the unit with additional cable fixing.
Dirt blaster nozzle increasing cleaning performance and covering a larger area.
Triple nozzle providing optimum cleaning flexibility and effortless change over of cleaning jets.

HD 6/13 CX+ Cold Water Pressure Washer

Specification HD 6/13 Cx+:
Power supply (Ph/V/Hz): 1/240/50
Water flow rate: 230-560 l/h
Pressure: 30-130/3-13(bar/MPa)
Max. water feed temp: 60°C
Connected load: 2.7kW
Weight: 29.2Kg
Dimensions: 375 x 360 x 935mm (LxWxH)

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 60 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Makita 1/2" Drive Impact Wrench

TW0200
Compact body size with ergonomic palm fitting soft grip. Externally accessible carbon brushes for easy maintenance. Aluminium hammer case with high durability. Square Drive. Variable speed with reversible rotation.

Specifications:
Bolt range: M10-M16.
Max. socket size: 32mm A/F.
Max. torque: 200Nm.
Impacts per minute: 0-2,200ipm.
No load speed: 0-2,200rpm.
Input wattage: 380W.
Weight: 2.1kg.

Available in 110V.

Kobe 10mm Reversible Angle Air Drill

DAR1510
10mm Jacobs chuck, fingertip control of reverse, reverse exhaust, overall head height 94mm,

Specifications:
1/4" NPT air inlet thread for 10mm air hose.
90PSI air pressure.
4CFM* air consumption.
3/8" - 24 spindle thread.
Overall length 178mm.

*Based on a 15 second cycle per minute average use.