Kennedy® Fibre Discs

Resin fibre, aluminium oxide sanding discs are designed for a wide range of industrial applications. High speed penetration of tough and high tensile materials combined with long disc life and optimum flexibility ensure Kennedy sanding discs give first class performance every time. Recommended for use with all portable grinders and sanders. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

127mm Diameter x 22mm Bore (Max 10,000rpm)

190mm Circular Saw

Max. Cut at 90: 66mm. Max. Cut at 45: 46mm. Blade Diameter: 190mm. Bore Diameter: 30mm. Input Wattage: 1,200W. No Load Speed: 4,900rpm. Weight 4.6kg. Available in 110V and 240V.

5704RK

Balanced & powerful.

CP7749
1/2” compact impact wrench. Twin hammer clutch. Composite handle and magnesium clutch housing. S2S technology and three positive power settings. Full power in reverse up to 750ft.lbs (1017Nm). Lightweight and low noise level tool. Maximise operator comfort with an extremely well balanced tool. Most convenient and unique reverse technology in the market.

Output drive: 1/2”.
Free speed: 9,000rpm.
Working torque range: 102 - 786Nm.
Maximum torque: 983Nm.
Average air consumption: 4.7cfm.
Air consumption @ load: 19cfm.
Air consumption @ load: 9l/s.
Air inlet NPTF: 1/4.
Sound pressure level: 95dBA.
Vibration a (ISO-28927-2): 8m/s2.
Vibration K (ISO-28927-2): 2.5m/s2.
Length: 186mm.
Weight: 1.98kg.

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B46. Grade: RA120. Diameter: 3mm. Length: 8mm. Max. rpm: 100,000. Weight per 10: 20g.

TV Socket

Coaxial socket outlet, 1 gang non isolated. White.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Conical

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

DeWalt Cordless Batteries

Much higher potential capacity than NiCad. Require less conditioning than NiCad. Less toxic than NiCad.

DE9502-XJ 14v 2.6Ah NiMh Battery

Charger compatibility: DC011, DE9135-GB, DE9112-XJ, DE9116-GB, DE9117-GB, DE9130-GB and DE9216GB.