Makita Batteries for Cordless Tools

Spare batteries offer the advantage of continuous tool use while original batteries are charging therefore increasing productivity. Particularly useful on repetitive tasks over long periods i.e. production lines, circuit board manufacturing. Nickel Cadmium (Ni-Cd) and Nickel-Metal Hydride (Ni-Mh) versions available.

NiCd Batteries - ?Plug-In? Type (Straight)

Charger compatibility: DC1414F, DC1439, DC1822, DC1804F.

Orbital Jigsaw

Specifications:
Electronic speed control.
Tool less blade fixing and changing.
Orbital action with 4 orbit selections.
Integral light.
Power input: 720W.
No load speed: 800-2800rpm.
Capacities: Mild Steel 10mm, Wood 135mm.
Supplied with: Jigsaw blade, dust nozzle, hex wrench, cover plate, anti splinter device and carry case.

4350FCT

3M Scotch-Brite Surface Conditioning Discs

For removing grinding marks and scratches leaving a greatly improved surface finish. Centre pin system contributes to a reduction in hand-arm vibration due to centred secure fixing system

York? Velcro-Backed Sanding Sheets

Aluminium oxide abrasive "resin-bonded over resin" to Velcro backed paper suitable for wood, plastics, ceramics etc.

7 Hole. Dust Extraction Type

Size: 165mm x 75mm.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

1,1/4" Bore

3M Roloc? Bristle Discs

Roloc bristle discs are ideal for removing paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants from large areas quickly and easily. Requiring minimal pressure from the operator and their maximum operating speed is suitable for most right angle tools.
The Roloc attachment system allows discs to be rapidly changed.

Roloc Bristle Disc Holders

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lapping & Pre-Polishing

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Blue Line - Fine

Cross cut blades, designed with a high TPI. Suitable for cross grain cutting solid wood giving a good finish.

Kennedy® 8 Piece Industrial Wire Brush Set

All supplied in clear bag with header.

Industrial Wire Brush Set (8 Piece)

Contents: (1 of each)
Shaft mounted circular brushes: 30 x 12, 50 x 20, 80 x 20.
Flat end de-carbonising brushes: 12 x 20, 24 x 25.
Pointed end de-carbonising brushes: 12 x 20 and 24 x 25.
Shaft mounted cup brush: 50 x 50.