SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06288 Airmate PNB3800B4/200

Specifications:
1 phase 4.0HP motor, 230V (16amp) supply.
200 litre air receiver.
Piston displacement 18.0CFM, max. pressure 10 bar.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10's 6's. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 50mm Height 10,200 MOS (rpm)

3M Scotch-Brite? Clean ?n Strip? Discs

XT (premium) and CG (general-purpose) discs are made of tough Clean & Strip material. It is especially designed for those cleaning applications where product life and edge retention are particularly important.

Purple XT

The new generation of clean ?n? strip. The new Purple XT disc product offers significantly improved life over the original black Clean ?n? Strip, and the competitive equivalents, at a more competitive price. XT is designed primarily for pre and post-weld cleaning in metal fabrication applications as well as the removal of rust and other coatings around the shop or in production environments.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

60mm Dia x 40mm Height 10,200 MOS (rpm)

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

3M Type 41 Flat Reinforced Cut-Off Discs

General-purpose aluminium oxide cut off wheels for accurate, clean cutting of all metals including stainless steel. Fibre reinforced, type BF. Format type 41. Made to EN12413.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)13mm x (W)25mm.

Kennedy® 4-Way Trailing Sockets

With fitted 3m cable and 13A plug.

230mm (9") 2200W Angle Grinder

Sliding trigger (dead mans switch). With spindle lock & disc guard. Accessories include: pin spanner and side handle. No Load Speed: 6,600rpm. Power input: 2200 Watts. Spindle: M14 x 2

G23SC2