Garryson Flap Discs

Suitable for a wide range of materials and applications, offering consistant grinding and finishing performance, long life compared to resin fibre discs and reduced vibration and noise compared to depressed centre grinding discs.

Standard Density - Zirconium Flap Discs

Ideal for use on most ferrous metals and for a wide range of applications such as weld seam removal, surface blending, edge grinding and weld preparation.
Disc diameter: 115mm.
For stainless steel.

Kennedy® Flexible Backing Pads

Suitable for use with all portable and air disc sanders. Recommended for use with Kennedy® abrasive discs.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Yellow Line - Coarse

Ripping blades, designed with a low TPI. suitable for cutting long grain solid wood.

York? Non Woven Abrasive Roll

Non-woven roll for cleaning, blending and finishing applications.

Black - Medium

Size: 150mm x 10m.

Rotabroach Mini Cutter Accessories

To suit Rotabroach Mini Cutters. Complete with pilot and spring. Spare parts also available on request. Shank Sizes: RA117 = 10mm. RA116/RA118 = 13mm cutters supplied separately.

Arbors

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

Makita Batteries for Cordless Tools

Charger compatibility: DC18RA, DC18SE, DC24SC, DC24WA.

NiMh Batteries - ?Slide-On? Type

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

SIP Fireball Diesel Space Heaters

Diesel/paraffin heaters are ideal for heating factories, warehouses, garages and workshops. The stainless steel combustion chamber and casing eliminates rusting and the heavy-duty construction means reliable, long-term use. Unique plastic fuel tank for long life and less fuel contamination. External fuel filter means less downtime. European made with a 2 year warranty. Illustrated with optional wheel kit.

Fireball 660S (09041)

Heat Output, kW: 19.2.
Heat Output, BTU: 66,000.
Approx Heating Area: 461 cubic metres.
Approx Heating Area: 16,400 cubic feet.
Fuel Consumption: 1.69 Kg/hour.

SIP® Trade 4"x8" Belt/Disc Sander

01926
Handles most sanding jobs on hard and soft woods and optimal belt and disc speeds ensure maximum efficiency. Comprises large capacity 0°-45° tilting 8" sanding disc and 0°-90° tilting belt sander. Supplied with 2 adjustable sanding tables and mitre guide, adjustable belt sander for horizontal or vertical use. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 750w (1hp).
Disc workable tilt: 0º-45º.
Belt tilt: 0-90º.
Disc speed: 2800rpm.
Belt speed: 500 m/min.