Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 40mm Height 7,700 MOS (rpm)

3M 255P Hookit™ Discs

Finishing product coated onto a film backing for consistent finishing. Aluminium oxide with an anti-load coating.

Hole Pattern: 600A. 6 Hole.

Diameter: 150mm.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Pointed Tree

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Kango Style Chisels

For Kango: 501, 627, 628, 637, 638, 430 - Type 750 Shanks. 19mm Hex Shank with Single Flat and Round Tang.

3M 266L Hookit? Discs

Micron graded aluminum oxide resin bonded to a 3 mil polyester film backing. Open coat abrasive surface is coated with a dry lubricant to resist loading. Sold as discs & sheets with hook backing for attachment to loop faced back up pads. Easy to re-use.

Hole Pattern: 500A. 5 Hole.

Diameter: 125mm.

Wet/Dry Vacuum Cleaner - 1000W

Commercial wet and dry use vacuums, full plastic construction. Swing handle supplied with comprehensive accessory kit.

WV370 - 15ltr

Suction: 2100mm. Capacity Dry/Wet: 15/9 litres. Cleaning Range: 23.2m. Size: 355 x 415 x 500mm

Rotabroach SRC Standard Cutters

Rotabroach cutters suit a wide range of applications throughout many industries including construction, engineering, mining, petro-chemical, gas, oil, ship building and railways. Rotabroach cutters are supplied with the industry standard 1/4" pilot bore and can be used in most magnetic drills. 700 N/mm2 material hardness. Fully ground M2 high speed steel cutters.

CP7830HQ 1/2" Super duty quiet ratchet

Adjustable exhaust, sound level as low as 79 dB(A)
Highest torque on the market: 122 Nm (90 ft-lb)
Rubber handle grip

Lightweight and well balanced tool
Ideal for larger fasteners

Part number 8941078308
Model CP7830HQ
Square drive 1/2"
Working torque Range 10-90ft.lbs 13-122
Max torque 122Nm 90 ft.lbs
Free speed 190rpm
Weight 1.22kg 2.7lb
Length 305mm 12"
Average air consumption 5 cfm 141 l/mn
Actual air consumption 21 cfm 524 l/mn
Air inlet thread size 1/4 NPTF in.
Min. hose size 10mm 3/8"
Sound DBA pressure 96
Noise level 85db(A)
Vibrations 14,3m/s

Kennedy® Wire Wheels & Brushes

Industrial rotary wire wheels & brushes are available as a comprehensive range including circular brushes, shaft mounted arbor style and de-carbonising brushes for use with power tools, machine tools and flexible drives.

Cup Brushes Twisted Knot - Threaded Bore

For fast and heavy duty cleaning. The support ring prevents excessive spreading. For removal of rust, paint and scale on large surfaces. 50 SWG