Dronco Diamond Cutting Blades

Dronco Perfect DB blades are the all-round product with a voracious appetite for cutting - for universal use in a broad range of applications on all construction sites or by emergency services. The steel blade is directly coated with diamonds in a special vacuum process.

Fast all-round cutting disc
Innovative vacuum brazed diamond cutting disc
Robust disc for general purpose use on all construction sites

Very good cutting properties in many materials such as:

Concrete, reinforced concrete, exposed aggregate concrete, concrete paving, Indian granite, quarry slabs, granite slabs, sand-lime stone, brick.
Iron constructions and iron profiles, cast iron, sheet metals, non-ferrous metals, ductile pipes.
Plastic, glass, fibreglass, carbon fibre, wood, rubber, etc.

Available in diameters from 115 to 230 mm for use on angle grinders
Diameters 300 and 350 mm for use on petrol-powered cutters and construction site saws.

Perfect DB Diamond Blades

York? Felt Bobs

York Felt Bobs are made of pure wool in a variety of sizes, shapes. The mandrels are exactly centered for true-running operation. Suitable for product finishing/polishing with finishing/polishing compounds

Plain End Cylinder (Bob)

3M Premium Cubitron™ Fibre Discs

985C
3M's premium blended Cubitron™ disc. Superior performance in all metal grinding applications. More aggressive cut and longer life than 3M 785C discs. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

100mm Diameter x 16mm Bore (Max 12,400rpm)

Hitachi Variable Rotary Drill

Lightweight and compact size with a high speed 240W motor. Supplied with chuck key, depth stop, belt clip.
No load speed: 4500/min.
Power input: 240W.
Capacities: steel 6.5mm, wood 9mm.
Chuck capacity: 6.5mm.
Overall length: 206mm.
Weight: 0.9kg.

Available in 240V and 110V.

D6SH

Metal Boxes

Flush fitting metal outlet boxes. For use with plate switches sockets/cover plates.

3M 245 Hookit™ Discs

Stiff E-weight paper gives a strong backing and long product life. Resin bond resists heat to prevent premature "burning". For initial and intermediate sanding on solid wood furniture, wood and metal door frames and other hard and soft wood, plastic and metal surfaces.
Use on: Wood, Metal, Paints, Fillers, Plastics.
Mineral: Aluminium Oxide.
Backing: E Weight Paper.
Coating: Open.
Bond: Resin.

Plain (no holes)

Diameter: 150mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

30mm Dia x 15mm Height 20,400 MOS (rpm)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

Bi-Metal High Performance (Pack 5)

Capacities: Steel: 1.5-4.0mm. Aluminium: 1.5-4.0mm. Plastics: 8.0mm. Tooth pitch: 1.2. Effective length: 50mm. Wavy set tooth form. Equivalent to Bosch T118AF.

Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

Makita® 14.4V Cordless Drill/Driver

Drive instantly changes from drill to driver. Large spindle bearing ensures positive, on-center drilling performance. Variable speed trigger for precise operator control. Shaped rubberized grip for comfort and increased operator control. Externally accessible brushes. Supplied with: 2x 2.6Ah NiMH batteries, charger, Phillips/slotted bit, battery cover, tool case. No load speed: Low 0 - 400 RPM High 0 - 1,300 RPM. Capacities: steel 13mm, wood 32mm. Torque settings: 32. Maximum torque: 65/30NM. Battery: MAK -280 -2710T. Charger: MAK -280 -8405E

6337DWDE