Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical-End Cutting

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Osaki™ Water Pumps

The Osaki™ WPS400 is suitable for pumping both dirty and clean water, it is ideal ground, rain and flood water drainage and waste water drainage.

Features include:
Can handle solids up to 5mm diameter.
Max delivery height/submersible depth 5m.
10m power cable.
Easy to remove filters for cleaning and access to the impeller.
Automatic float switch (turns on 500mm and off at 50mm).
Strong double insulated case.
No metal parts in contact with water.
Overload protection.
Multi-hose adaptor-accepts 25mm or 32mm outlet hoses.

WPS400 Submersible Water Pump 230V

Specifications:
Nominal voltage: 230V.
Nominal frequency: 50Hz.
Power consumption: 400 Watt.
Delivery rate max.: 7500 l/h.
Delivery height max.: 5m.
Submersion depth max.: 5m.
Water temperature max.: 35°C.
Foreign bodies up to: diameter: 5mm.
Switching point ON: approx: 50cm.
Switching point OFF: approx: 5cm.
Suitable hose sizes: 25mm (1") or 32mm (1,1/4").

FOR DIY USE, Not Warranted for Industrial Use.

3M Roloc? Wheel Products

Designed for use on portable tools and featuring the convenient Roloc+ twist-on, twist-off fixing system.

Cut & Polish Unitised Wheel R

Compressed 'Level Cut' web designed for blending and polishing, giving an excellent fine finish. Use on moulds and dies to restore surface finish without changing the surface geometry.

Chicago Pneumatic? 13mm General-Purpose Air Drill

CP-789-HR
Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for heavy drilling, reaming, hole sawing and jobs requiring a lot of torque.
1/4” NPT air inlet thread for 10mm air hose, 4cfm* air consumption, 3/8” - 24 spindle thread.
Overall length: 200mm.

*Based on a 15 second cycle per minute average use.

Kennedy® Power Tool Chisels

Suitable for air and electric hammers and breakers, for all classes of work.

Makita Style Chisels

For Makita: HM0810, HR3500, HR3520, 8035NB. 17mm Hex Shank with Round Tang & Round Retainer Recess.

Solent? Cleaning and HygieneWash & Wax - 5 Litre

HIGH FOAM, HIGH GLOSS VEHICLE SHAMPOO

Mild formula - Neutral pH - Water based
Effectively lifts traffic film without harm to polished paintwork and trim
With foam boosters for fast removal of dirt and grease
High gloss wax finish
Can be used with hot or cold pressure washing systems or hand washing
Easy to handle container

Dimensions
185(W) x 135(D) x 283(H)mm
5kg Gross Weight

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding. Recessed one side 13 x 13.

Type 6, Straight Cup

Makita Batteries for Cordless Tools

Lithium-ion batteries are 40% lighter than a similar Nickel Metal Hydride (Ni-MH) battery. Lithium-ion batteries feature a high energy density technology that will deliver 430% more working capacity during the lifetime of this battery compared to Ni-Cad batteries. Lithium-ion batteries have an extended length of time during which they hold their charge - even after a long period of storage the batteries will deliver their power.

Li-Ion 'Slide-In' Type Batteries

Charger compatibility: DC18RA, DC18SE, DC24SC.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding. Recessed one side 10 x 11.

Type 6, Straight Cup