Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W173. Grade: RA80. Diameter: 10mm. Length: 3mm. Max. rpm: 70,000. Weight per 10: 30g.

Kennedy® "Contractor Packs" Jigsaw Blades

The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user.

HSS - Heavy Duty (Pack 20)

Kennedy® Pin Spanners for Angle Grinders

Several types available. Weight 110g.

Pin Spanner

To suit Makita 125mm.
Pitch: 28.
Pin diameter: 3.4.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Kennedy® Plastic Casing 240/110V Site Transformers

Manufactured to stringent quality levels ensuring all sockets and outlets comply with BS4343. With thermal overload, push button reset, replaceable internal fuses and strong, robust cases. For use with all portable power tools and machinery to ratings given. 240V input - 110V output. C.T.E. 2 metre cable. All with 2 outlets except for 750VA rating model which has 1 outlet only.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B41. Grade: RA80. Diameter: 16mm. Length: 16mm. Max. rpm: 34,000. Weight per 10: 220g.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Kennedy® Scythe Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Flat Tapered

A general-purpose sharpening stone for agricultural and horticultural tools such as hoes, spades, edgers, clippers and shears.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits