York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 76 x 50mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)30mm x (W)20mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 40mm Height 7,700 MOS (rpm)

York? Mandrels

For use with Cartridge Rolls. This steel adaptor is used to secure and hold both tapered and parallel sided cartridge rolls to air grinders or electric drills. This holder is used by sliding the cartridge roll onto the mandrel pilot until the bottom of the abrasive touches the threaded steel area. Simply screw the cartridge roll onto the threads to secure. Your mandrel should be at least 13mm longer than your cartridge roll.

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Taper Type

Tapered for angles, corners and irregular or concave surfaces.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.

3" Bore

York High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Glass Fibre Backed (For Stainless Steel - Non-Scratch).

127mm Dia x 22mm Bore 12,000 MOS (rpm).

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade A30/A24. For general-purpose use on metals.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade C24. For use on stone and non-ferrous materials.

York Grinding Wheels

Vitrified bond for precision grinding. Unaffected by water, acid and oils. All 1,1/4?? bore, supplied with 1??, 7/8??, 3/4??, 5/8?? & 1/2?? bore nylon bushes. Tough general-purpose aluminium oxide which is hard wearing. Used for surface and off hand grinding. Refined aluminium oxide with a faster grinding operation. Suitable for high speed steels, precision grinding and general surface grinding. Silicon carbide, used on low tensile strength materials, non ferrous metals and carbide tool grinding. All York grinding wheels are supplied in a unique storage box, which helps prevent chipping and other accidental damage. Spare cases available on request.