York? Clean "n Strip Unitised Surface Cleaner

High stock removal producing a very good finish. Cleans surfaces faster and more effectively than wire brushes, scrapers or pickling pastes. As there is no metal components used in the manufacture of these high strength cool cutting discs, accidental damage to the work piece is eliminated. Suitable for grinding right into corners, across contours and in hard to reach areas. Ideally suitable for preparation and cleaning of welds, rust removal and removal of discolouration.

Unitised Wheels

Requires 6mm mandrel supplied separately: YRK-280-5010K.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Oval Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

York? Depressed Centre Grinding Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. Not to be used for ?free hand? or wet grinding. Optimum angle for use 25 to 35.

Type 27

Grade A30/A24. For general-purpose use on metals.

York? Cartridge Rolls

Spirally wound Aluminium Oxide cloth rolls that wear in use constantly exposing new abrasive. Used for weld flash removal, deburring, blending and polishing applications. Available in two types. A steel mandrel must be used to secure the abrasive to the tool.

Taper Type

Tapered for angles, corners and irregular or concave surfaces.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 15mm Height 12,300 MOS (rpm)

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Single-Sided Pads

Single-sided highly flexible abrasive coated sponge pad. Will conform to the shape of any contoured surface. Available in three different grades. Size: (W)110 x (L)140 x (D)5mm.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10's 6's. Recessed hub design for maximum access in tight corners.

6mm Shank

80mm Dia x 50mm Height 7,700 MOS (rpm)

York? Nylon Interleaved Wheels

Made from high quality nylon, which is both flexible, durable and does not clog as easily as standard abrasive. 6mm shank diameter. Alternate flaps of abrasive and interleaved with a versatile high quality nylon. Ideal for: matching/blending a finish, light deburring, decorative/cosmetic applications, on most materials, rust removal and blending. Available in a choice of Coarse, Medium, Fine and Very Fine Density Grades and in sizes 50 x 25mm, 50 x 50mm, 76 x 50mm and 100 x 50mm.

Nylon Interleaved Wheel 50 x 50mm

Suitable for: Deburring, producing cosmetic finishes on most materials, rust removal, blending.

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.