Solent Food Safe Silicone Grease

A versatile silicone grease for operation in extremes of high and low temperature. Food Safe Silicone Grease can also be used on food product applications or where water repellent properties are of prime importance as it offers excellent physical performance and is NSF H1 registered.
Size: 100ml.

Paint Markers

2 - 4mm point size. Solvent-free water- based permanent ink. Suitable for marking surfaces indoor and outdoor. Resistant to water and light.

750 Standard Point

SPSP4 4-DRUM ALL WEATHER POLY SPILL PALLET

A spill pallet full of rain water does not offer much protection should a drum leak. Where pallets are not kept under a shelter, make use of this unique design complete with dual lockable shutter doors allowing access from both sides. The unit also includes integral ground anchoring points.

Sherlock® Silicone Sealants - General-Purpose

Sherlock high performance Acetoxy silicone sealants provide a permanently water tight flexible seal and offers excellent adhesive properties, making it suitable for use on glass, sanitary ware, ceramics and non-porous surfaces.

Typical applications: Sealing around door and window frames, sealing glass to glass and aluminium, sealing around pipes, sanitary fixtures and duct work. Draft proofing casement windows and doors.

Not suitable for use with aquaria. On porous or unsound surfaces priming is advised. Not suitable for use on bitumen or oily surfaces. Over painting is not recommended. It is the users responsibility to determine suitability.

Supplied in 310ml cartridges for use with a caulking gun.

Available in a range of colours.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Maintenance/Light Duty
Size: 50 x 40cm
Pack Qty: 50
Absorbs (ltrs): 0.5

Shell Grease - Alvania

For heavy duty bearings and general industrial lubrication, heavy duty plain and rolling element bearings operating under severe conditions including shock loading in wet environments. Operation over the temperature range - 20C to 100C for bearings operating at 75% of the maximum rated speed (Can withstand up to 120C intermittently)

Plus Gas

Formula 'A' rapidly penetrates and lubricates rusted or seized components freeing them for easy dismantling.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

'EVER BUILD' Roof & Gutter Sealant

Bitumen based sealant and adhesive that provides instant, permanent weather-proofing to a wide variety of roofing applications. Adheres to most common roofing materials such as bitumen, asphalt, felt, metals and wood.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings