Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

So-Hydra 'Plus' Hydraulic Oil

Excellent demulsifying properties (water and water containing fluids are rapidly separated). Very good corrosion protection to steel. Good corrosion protection to copper. High ageing stability/high oxidation stability. Good anti-wear protection. Very good hydrolytic stability. Excellent filtration behaviour. Low foaming. Excellent air release.
Available in grades VG32 to VG150.
Supplied in 20 litre stacking poly containers or 205 litre barrels.

Evo-stick Adhesives



Rapid Mitre Fix Adhesive

Cyanoacrylate adhesive with activator, designed to bond and repair picture frame like mitre joints. Bonds MDF, PVC-U, rubbers, metals, some jewellery, plastics and porous materials such as wood. Produces clean, tight and thin joints instantly with no need for clamping.
Size: 50g.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Food Safe Belt Dressing

This H1 registered product is designed to extend life of leather, rubber and synthetic belts. Cleanly applied from the 500ml aerosol, it improves grip and allows the belt to transmit full power without sliping even in wet and damp environments.

British Metric ?O? Rings

NBR70 Rubber ?O? Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30C to +120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS4518
Many other sizes and materials in stock.

Filatech Inserts and Accessories

On-Site Spill Protection
Provides complete protection from on-site spills caused by overfilling during refuelling, leaking engines, burst hydraulic and fuel lines. Helping you reduce the risk of escalating project costs caused by ground or water course contamination.

Jizer Soluble Degreaser

Powerful dissolving action rapidly removes oil, grease, tar, bitumen and waxes from a wide range of metals, plastics and painted surfaces. Rinses off with water or can be blown dry with an airline.

Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.