Castrol Variocut™ C486 Neat Cutting Oil

• Advanced additive technology - improved tool life, higher speeds, increased productivity.
• Chorine free - environmentally acceptable.
• Low odour - pleasant to use, high operator acceptance.

Loctite Instant Adhesives

The Loctite O?ring kit saves the need for complete disassembly. Eliminates the need for an inventory of different sized O-rings. Joints resist water/oil and are as strong as the rubber itself. Kit contains: 7 standard diameter sizes of nitrile cord, splicing jig, safety knife and Loctite 406 instant adhesive (1 bottle).

O?Ring Kit

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Paint Markers

2 - 4mm point size. Solvent-free water- based permanent ink. Suitable for marking surfaces indoor and outdoor. Resistant to water and light.

750 Standard Point

Lec-Klene High Flash Point Solvent Degreaser

A highly refined, ultra low odour solvent cleaner which has been formulated to satisfy the exact requirements of military, aerospace and defence related industries.



High flash point degreaser - safer in use. Ideal for use in confined areas. Powerful solvent cleaner which rapidly removes oil, grease, wax, tar, bitumen, brake block dust and other general soiling. No detrimental effect on painted surfaces, ferrous and non-ferrous metals, and epoxy based composites, acrylic sheet, plastics and rubbers. Meets military and industrial specifications: DEF STAN 68-148 issue 2. ASTM F519-97 (hydrogen embrittlement). ASTM F1110 (sandwich corrosion). Controlled evaporation. Zero residue on evaporation. Virtually odourless in use. Non-conductive.

Everbuild 450 Builder's Silicone

450 Builders Silicone is a premium quality low modulus non-corrosive neutral cure silicone sealant that adheres to virtually all substrates, both porous and non-porous. Typically used for construction expansion joints and perimeter pointing of all types of door and window frames. Conforms to ISO 11600 class: F 25LM.

450WE

Flex Grease

perma Flex Grease, Multi-purpose grease for lubricating roller bearings, plain bearings,sliding guides and shaft seals.



SFO1 - Universal Grease
• Contains EP additives to reduce wear and tear
• Water-resistant (hot and cold), lye-proof.
• Contains no heavy metals.

High 5 Grey 1k High Build Primer

High 5 is a high-build primer for the rapid repair of surface defects in painted panels. May be used for small spot repairs or complete coating of new panel. Ready for use single pack acrylic super high build primer filler. Capable of producing a similar film build to that of a 2K spray gun applied primer. Fast drying, easy sanding and economical. Ideal for spot and smart repair. Available in beige or grey colours.

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Industrial Paint Markers

Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece - ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.