Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

Wheel Cleaner

Powerful foaming alkaline formulation slices through road grime, grease and brake dust to transform wheels in seconds. Suitable for magnesium, aluminium alloys, most non-ferrous metals, and plastic wheel trims. Spray on and rinse off.

Solent™ Food Safe Lubricating Oil

FOOD SAFE lUBRICATING OIL
An excellent water clear synthetic lubricant for use on chains, pivot points, sliding surfaces and delicate mechanisms. It's excellent water repellent properties make it ideal for use where corrosion may become a problem. In hot conditions where application is difficult it is advisable to use this product in our non flammable aerosol 500ml container.
FDA compliant
NSF H1 registered
Odourless
Tasteless
Water repellent
Safe for use at temperatures from -60 - 26C.
Directions for use:
May be applied by spray, oil can, automatic lubrication dispensing system.

Just-Orange Citrus Based Solvent Degreaser

Citrus-Based Solvent Degreaser
Just Orange is a powerful, citrus-based solvent degreaser for the cleaning and degreasing of engineering components and equipment. Effectively removes heavy oils, greases, bitumen, wet paints, adhesives and sealants from virtually all hard surfaces.

Contains no Chlorinated or Aromatic solvents.
For use as an alternative to solvents such as acetone, benzene, butyl cellusolve, CFC’s, Freon, Methylene Chloride, HCFC’s, isopropyl alcohol;, methyl ethyl, ketone, mineral spirits, toluene, trichloroethylene, xylene etc.

Markal China Markers

The paper-wrapped grease pencil is a smooth-writing, economical marker for marking almost any surface.

MRK-96015

7840 Natural Blue Degreaser

Loctite 7840 biodegradable cleaner and degreaser for removing grease, oil cutting fluids and workshop grime

Your benefits

Biodegradable Solvent free, non-toxic, non-flammable Diluted with water Removes grease, oil, cutting fluids and workshop grime Application area

Metal working industry, workshops, machines, floors, store rooms, staff areas

Molyslip 11005 Alumslip Anti-Seize 500g Tin

Copper-free Alumslip anti-seize/assembly compound is specially formulated to protect against seizure even under extreme conditions of pressure and temperature. Also a highly effective thread lubricant and protective. Temp range up to 1100°C.

Solent Maintenance Aerosols

Within the Solent Maintenance range of aerosols you'll find electrical contact rapid cleaners, foam cleaners, multi purpose oils, penetrating sprays, rust protection, flaw detectors, weld anti splatter, mould release, drive belt dressing sprays and many more.

All are formulated to stringent standards of quality, to meet the demands of the commercial user!

SC1-500B Rapid Dry Industrial Solvent Cleaner

Solent SC1-500B Rapid Dry Industrial Solvent Cleaner is supplied in a large 500 ml aerosol; it is formulated to quickly penetrate grease, oil and general soiling on metal/electrical components and precision parts allowing them to be cleaned quickly. The formulation rapidly evaporates leaving a clean dry surface it is very effective at temperatures ranging from 5C to 30C.

It is Safe to use on most plastic components. It will soften some lacquers. If in doubt about suitability, test on a scrap component or a small area before general application.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Metallic Top coats

Rich acrylic enamel that gives a smooth metal like finish. Suitable for use on almost any surface. 500ml. Please note, colours are for guidance only.
Available in gold, silver, copper, brass or antique gold finishes.