Pan Fibre Gland Packing

VT2 is braded from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance without shaft wear problems or high costs of traditional synthetic fibre packing. Extended life even at high shaft speeds and pressures within a wide pH and temperature range.
Applications: Pumps, valves, mixers, reactor vessels and reciprocating applications. Resistant to general chemicals, solvents, oils, water and steam. For use in arduous conditions in process applications where alternative packing causes excessive wear or require frequent maintenance and replacement. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Operational limits
Pressure rating: 100bar
Rotary speed: 18m/s
Temperature: -40C +250C
pH range: 2-14
Roll length: 8m

Type VT2

One Strike Lightweight Filler

Shrink and crack resistant is ready to paint or paper in 30 minutes and requires minimal/no sanding. Suitable for repairs to plaster, wood, brick, stone or rendering.

Wood Adhesive (Resin W)

Used for general woodworking joinery, bonding wood veneers and laminated plastics to wood or chipboard cores. May also be used for bonding other materials to recessed wood. Can be used on all woods, is fast setting with a bond strength generally better than the wood itself. Complies with BS 4071:1996.

SuperLube Grease

Multi-purpose synthetic lubricant with PTFE. Silicone free. H1 approved. Temperature range
-43C to +230C



SuperLube Grease: Suitable for heavy duty and multi-purpose applications. Out-lasts conventional greases.

Artline 400XF Paint Markers

Special permanent pigment ink. Valve controlled ink flow with a stroke width of 2 - 4mm. Opaque and weatherproof. Available in black, blue, green, red, white and yellow (singles). White and yellow also available in packs of 12.

Ambersil Rust Flush

Penetrating spray with freezing action engineered for convenience and performance. An advanced formulation based on the laws of thermo-dynamics which rapidly freezes rust down to -40°C causing micro fissures to form the rust layer. The micro fissures ensure the active penetrating ingredients get to work deep into the thread and allow the fastener to be removed up to 10x faster than ordinary penetrating formulations.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Oil-only/Medium Duty
Size: 50 x 40cm
Pack Qty: 100
Absorbs (ltrs): 0.8

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Carburettor Cleaner

&34; Removes dirt, grease, gum and varnish from carburettors, throttle linkages and automatic chokes
&34; Improves fuel economy and engine performance
&34; Can be used with Catalytic Converters.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Cleaner No.1