Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

'PuttySeal' Pre-mixed Sealing Putty

Ideal for rapid response to unexpected releases of liquid. Provides temporary plugging of holes in drums or pipes. Pre-mixed putty is ready to use. No surface preparation is required. Applies directly onto container to form a seal. Bentonite clay granules that form a barrier to aqueous liquids. Non-toxic.

Amberklene LO30

Low odour solvent. A powerful, fast drying, low odour cleaner/degreaser which benefits from good compatibility with a wide variety of materials. Ideal for use on industrial, aerospace, general engineering and precision cleaning of electronic and electrical equipment. Highly effective cleaner/degreaser. Fast evaporating, leaves surfaces clean and dry. Outstanding compatibility with plastics. Meets aerospace specification. Safe for use on metals and painted surfaces. Ultra low conductivity. Low odour, ideal for use in enclosed areas. US Federal Specification TT-N-95B.Listed in British Airways standard practice manual.

Activator for Classic & Futura

(supplied separately)

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

Layout Fluid

Industrial methylated spirit based.

Opaque

For use with heavy and black metals. When scribed or scored the dark metal shows up well against the film. Can also be used for colour coding.

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2

SOLENT BLUE ANTI-FREEZE & COOLANT

Suitable for all engine types. Provides year round
protection. Prevents freezing in the winter and overheating in the summer. Contains anti-corrosion additives. Inhibits rust for up to 2 years. Works to temperatures of -55°C.
It is ready mixed, requires no dilution.

Available in 1LTR, 5LTR, 20LTR & 208LTR

PlastiKote Radiator Twist & Spray

New Easy-Spray Technology - provides added control to make spray painting easier, faster and cleaner than ever before. New, ultra smooth formula, providing flawless coverage that dries quickly to a tough, durable finish. Twist and lock mechanism means there is no separate top to remove or replace after use. Cap and button design shields the finger from paint for a cleaner spray-painting process. Quick and easy to use. Non yellowing formula. Resists heat up to 100ºC. Available in gloss and satin finishes.

This product is specially formulated to make painting radiators quick and easy. The finish obtained is both durable and professional. There are no brushes to clean and you will not be left with brush marks on your radiator.
Touch dry in 30-50mins, thoroughly dry in 2-3hrs.
Coverage: 2.23m²