British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Packing Extractors

With Hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type "TRACC" have and integral tip corkscrew tip, type "TRACR" have replaceable tips for extended life.

Type TRACR - Replaceable Tip

O-Ring Service Kits

Kits supplied in blow moulded storage cases with sunken cavities for the simple location of the correct sized rings. No more jumbled up ?O? rings.



Manufactured to BS1806.
Supplied in a durable storage box.

528 Contact Adhesive (Thixotropic)

A general-purpose one part polychloroprene rubber/resin contact adhesive which has a high initial grab with an excellent final bond strength and a good temperature resistance. Used for bonding decorative and rigid laminated plastic sheets of PVC of ABS to wood, wood composite boards and metals. Also bonds rigid plastic nosings and covings. Can be used on suspended or vertical flat surfaces. Thixotropic (TX), which is faster curing and of a thicker consistency than standard 528 contact adhesive. Available in 1 or 5 litre tins.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

Workfloor Ramp

This ramp is designed to be safe to use with any size of workfloor, with an integral joining strip to ensures that it stays in position and a ribbed surface for better grip. At only 80cm wide it can be fitted to any edge of each of the work floors. 100% polyethylene.
L x W x H (cm): 65 x 80 x 16

SWR-1

Metallic Top coats

Rich acrylic enamel that gives a smooth metal like finish. Suitable for use on almost any surface. 500ml. Please note, colours are for guidance only.
Available in gold, silver, copper, brass or antique gold finishes.

Gear & Wire Rope Lubricant

A fast drying, high solids, high penetrating lubricant that forms a tough, durable barrier against corrosion, abrasion, dust absorption, water wash off and extremes of temperature.
Suitable for use on gears in motion.
Size: 400ml

Base Units

On-Site Spill Protection
Provides complete protection from on-site spills caused by overfilling during refuelling, leaking engines, burst hydraulic and fuel lines. Helping you reduce the risk of escalating project costs caused by ground or water course contamination.

LPS® Heavy-Duty Silicone Lubricant

Meets FDA regulation for incidental food contact. Water-based, silicone-rich formula. Low odour. Ideal for rubber and plastic surfaces. Eliminates sticking, binding, and squeaking. Non-staining. Safe on most surfaces. NSF® Certified: H1 Registration # 059820 (Aerosol); # 059821 (Bulk).