Castrol High Temperature Grease

High performance lithium complex grease. NLGI 2 grade. Operating temperature range -40 to +150°C. High load carrying capacity. Good water resistance & adhesion to metal surfaces.

Kennedy Caulking Guns

Industrial, robust and easy to use. Suitable for use with standard 310ml cartridges of sealant, filler or adhesive.

Castrol Magna Slideway Lubricant Oil

Based on highly refined mineral oils which incorporate tackiness & lubricity additives. Provides smooth slideway movement under heavy loads. Magna BD68 is recommended for horizontal slideways. Magna CF220 is recommended for vertical slideways. Excellent anti-wear properties

Magna BD68 & CF220

Ambersil Graphite Lock Lube





A dry graphite lubricant for long lasting, smooth lock operation. The microscopic grains of graphite ensure good penetration and effective anti-seize lubrication. Extends
lock life, even in mildly corrosive environments.
· Long lasting lubrication
· Dry film does not attract dirt and grime
· Excellent water resistance
· Wide operating temperature range
· Works even when lock has mild corrosion
· Ideal for corrosive or saline conditions
APPLICATIONS
· Safety padlocks
· Door locks
· Brass and stainless steel locks
· Padlocks exposed to the weather
· Hinges

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Tins

British Metric ?O? Rings

NBR70 Rubber ?O? Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30C to +120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS4518
Many other sizes and materials in stock.

Paint Markers

1 - 2mm point size. Solvent-free water-based permanent ink. Suitable for marking surfaces indoor and outdoor. Resistant to water and light.

751 Fine Point

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

LPS® Electro Contact Cleaner

Fast drying, CFC-free, cleans and degreases delicate precision mechanisms with its fast-penetrating action to remove oil, grease, dirt, flux and other contaminants. CFC-free is safe on metal and plastic, is fast evaporating, does not leave a residue and does not contain HCFCs. NSF K2 registration 059813: (aerosol); 059814: (bulk).