Food Safe Clear Gear Oils

H1 registered, these gear oils are made from synthetic base oils combined with selected additives to produce a high performance gear lubricant. With excellent corrosion protection, oxidation and thermal stability they extend gear life/operating duty and lower maintenance costs

Food Safe Clear Gear Oil Grade G150

British Metric ?O? Rings

NBR70 Rubber ?O? Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30C to +120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS4518
Many other sizes and materials in stock.

Beethoven VHD Cutting Oil

High performance semi synthetic, translucent water based cutting and grinding fluid. Developed to provide optimum results on a wide range of materials and applications.



Applications: General purpose machining, extreme pressure machining performance, bio stable general pressure machining, bio stable extreme pressure machining and grinding, bio stable high performance machining ,aerospace aluminium alloy machining, high load grinding, glass grinding.

Castrol Magna Slideway Lubricant

Based upon highly refined mineral oils which incorporate tackiness and lubricity additives. Provides smooth slideway movement under heavy loads. Excellent anti-wear properties.

Magna 2/22/32/68/GC32

No images are available for GC32 Magna Oils

Araldite 2015 - Toughened Epoxy Paste

Thixotropic with good gap filling properties. Non sagging up to 10 mm thickness. Toughened, high sheer & peel strength. Ideal for bonding dissimilar substrates. Particularly suitable for SMC and GRP bonding. Also Ferrous metals, aluminium, copper etc. Light handling strength at 4 hours.

Bright, Cold Galvanise

Zinc-rich acrylic coating blended with aluminium flakes to produce a bright freshly galvanised looking, aesthetic coating. Sacrificial coating protects metalwork and steels from corrosion. For use on bare non-rusted steel and seams. Zinc 99% pure, content 40% cured film. Bright silver, freshly galvanised appearance. Suitable as primer, can be over-coated with acrylic, cellulose, alkyd, polyurethane-alkyd and epoxy paint systems. Suitable as top coat for Cold Galvanising Spray. Fast drying. Suitable for use as renovation media as specified in BS EN ISO 1461:1999.

Protective Coating Red-Hot-Dip

Hot dip strippable plastic coating moulds itself around the component or tool being coated to provide 100% coverage and protects against corrosion and impacts, for up to ten years. The component protected can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused. Never directly apply heat to melt the protective dip, always use with a suitable melting pot. Working temperature 130C to 160C (for optimum results 140C to 145C).

RD160 - Red colour

Weight: 25Kg

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

Paint Markers

2 - 4mm point size. Solvent-free water- based permanent ink. Suitable for marking surfaces indoor and outdoor. Resistant to water and light.

750 Standard Point

LPS® Greaseless Lubricant

The fine lubricant that penetrates, dries fast and will not attract dust or dirt. Inhibits corrosion by providing a light greaseless film. Lubricates, cleans and protects delicate mechanisms. CFC-Free. Non-flammable propellant. Non-conductive. Dissolves grease and oil. USDA approved.

LPS1