574 - General Purpose Flange Sealant

Conforms with BS6920 (potable water). General purpose flange sealant for gaps up to 0.5mm. Typical applications are hydraulic and pneumatic control valves, transmission and engine flanges and marine pipework.
Suitable for 90% of flange sealing applications.

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

Bostik General Purpose Adhesive - 1782

Used by toy, leather goods and PVC ware manufacturers.

Greaseless Lubricant

Multi-purpose lubricant that prevents electrical and electronic failures caused by water penetration, humidity, condensation or rust.
Size: 400ml.

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2

Tapping & Drilling Lubricants

For tapping, drilling, threading, sawing, reaming, broaching, drawing, pressing, extruding, forging and forming
High performance, low melt point metal working compound for use with all metals.
Based on extreme pressure additives fortified with MoS2 to provide excellent extreme pressure performance and lubricity.
Improves cutting performance, providing a better surface finish.

MCC High performance metalworking compound

VHB Surface Cleaner

VHB surface preperation cleaner is ideal to aid preperation of a surface prior to applying VHB tape be it a single or double sided adhesive tape. Supplied in 1 litre bottle or a box of 100 sachets.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

RN Metal Markers

Permanent bright opaque markers for most surfaces, whether semi-porous or non-porous. RNM ink penetrates grease, oil and rust to give a waterproof mark which will withstand many kinds of metal processing. The marker comprises a flexible plastic container with a ball valve writing head. Applications include metals, rigid plastics, painted surfaces, wood, stone, asphalt and similar materials. Complete with standard 2.5mm ball heads.

Hammerite Hammered Finish Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Hammered Finish - Tins