3-in-1 Oil

"A tool kit in a can". Multi-purpose suitable for lubricating, penetrating, cleaning and prevents rust. For use in the home, office, workshop and countless other areas. The flexible plastic spout allows you to reach those hard-to-get-at spots.

Wellseal Jointing Compound

Gives the best possible sealing performance in the most varied of conditions. Threaded connections, flat faced joints, with or without a gasket depending on assembly design. Resistant to commonly used fuels, lubricants and coolants, is non-corrosive and free from abrasive fillers.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Castrol Corrosion Inhibitors

Castrol Rustilo? is a powerful solvent deposited corrosion preventive with excellent water displacing properties. The solvent, after evaporation, leaves an ultra-thin greasy protective film.

Rustilo? DWX32 Dewatering Corrosion Preventive

Castrol Rustilo? DWX 32 is a medium to long term protective for use in severe conditions where a high degree of protection is required. It is ideal for protection of machine tools and components prior to storage or transportation. The product also shows good water displacing properties. Although Rustilo? DWX 32 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Advantages:
Forms an even and robust film.
Stable film characteristics reduce run-off loss and thus increase process reliability.
Fingerprint suppressant.
Good water displacing and penetrating properties.
High stability against acidic and alkaline contaminations.
Long bath-lifetimes possible.
Economical in application.

Stainless Steel Putty (ST)

Stainless steel filler for repairs. Used for rust-free patching and rebuilding. Bonds to ferrous, non ferrous metals and concrete. FDA approved. Max Operating Temperature: 121C.Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Multi-Purpose Enamel Gloss

Suitable for interior or exterior use and resistant against corrosion chemicals, petroleum and UV light. Heat resistant to 121°C, long lasting durable and incredibly versatile. Spray cans incorporate a valve system that allows the can to be used at any angle without clogging, making it ideal for use in hard to reach areas.
Size: 400ml

542 Hydraulic Sealant

Medium strength, medium viscosity. Impervious to all common hydraulic fluids including fire resistant synthetics. Will not clog valves or fine filters. Replaces tapes, pastes and self-sealing compression joints.
Recommended for threaded fittings as used in hydraulic and pneumatic installations.
Medium threadlocking strength.
Suitable for high pressure systems.
Temperature range: -55C to 150C

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

120ltr 2-Wheeled Poly Bin Spill Kits

Contents:
75 x pads.
9 x socks.
8 x pillows.
10 x disposal bags.

General-Purpose Cutting Fluid

For drilling, turning, milling, threading, reaming, grinding. Bactericide free - reduced dermatitis issues - No odour. Highly resistant to micro-organisms, bacteria, fungi. pH-value 9.1. Efficient lubrication and cooling - longer tool life.

Image not available for 910kg Cutting Fluid

Ambersil Air Duster FG Aerosol

Developed for use in food processing factories. Provides a powerful dry blast of inert gas for the removal of dust, dirt and other dry contamination from delicate electrical equipment.

NSF K2 registered for use in the food industry.
Non-flammable 400ml aerosol.
Ideal for removing 'dry' residues such as flour, cereals, grain, tea and coffee powders.
Use where liquid cleaners may be undesirable or impractical.
Powerful blast to quickly remove residue from inaccessible areas.
Safe to use on keyboards, computers, lenses, switches, Precision instruments, PCBs.
Non ozone depleting, does not contain CFCs or HCFCs.
Safe on all metals, plastics, rubbers and painted surfaces.

Ambersil Food Grade Range.