495 - Low Viscosity Instant Adhesive

Thin easy flowing general-purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. Anvailable in 20g and 50g.

British Metric ?O? Rings

NBR70 Rubber ?O? Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30C to +120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS4518
Many other sizes and materials in stock.

British Metric ?O? Rings

NBR70 Rubber ?O? Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style seals or as shaft seals and allow both rotary and linear movement. They have a 70 Shore hardness and an operating temperature range of -30C to +120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS4518
Many other sizes and materials in stock.

EPX Structural Adhesive Nozzles





Spare Nozzles. Pack of 12 pieces.

Castrol Spheerol L-EP Greases

Lithium-based general-purpose extreme pressure greases, based upon mineral oils and incorporating extreme pressure agents to protect bearing components subject to heavy and shock loadings. Available in a range of consistencies to suit most applications, from an NLGI 2 for general-purpose bearing lubrication to an NLGI 00 semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes. Being lithium-based, Spheerol EPL greases have good water tolerance, are resistant to water washing and incorporate powerful rust inhibitors to protect bearing components against corrosion.

Features:
Excellent stability gives long service life.
Wide operating temperature range of -20C to 120C.
Good adhesion and water-wash resistance.
Range of consistencies to suit most applications.

Devcon "5 Minute" Epoxy Adhesive

Clear, permanent non-shrinking bonds. Bonds metals, glass, ceramics, concrete and wood. Works down to -40C when cured. Max Operating Temperature: 93C. Pot Life: 4 minutes. Mix Ratio: 1:1.

LPS® Force 842® Dry Moly Lubricant

Features:
Fortified with molybdendum disulfide.
Provides a quick drying, thin film.
For assembly and break-in lubrication.
Works under high temperatures - 450C and pressures - 100,000 psi (6890 Bars).
Resist dust and dirt.
Prevents seizure of parts.
High adhesion.
Water and chemical resistant.

Spray Putty

Covers surface imperfections such as light scratches and pin holes to leave a super smooth finish which is primed ready for painting.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

Decorators Caulk

EVO-STIK Decorators Caulk is a solvent free fast drying paste that sets by evaporation of water when exposed to the atmosphere. It is ideal for sealing low movement gaps around windows, doorframes, skirting boards and general sealing of internal fixtures and can be painted when set.
Size: 310ml.