Line Marking Gun

Manufactured from reinforced nylon. For offering trigger action to line marking spray cans, giving improved user comfort during prolonged use.

LPS® ThermaPlex™ Hi-Temp Bearing Grease

Hi-Temp is designed to reduce the risk of bearing failure at high temperatures. Hi-Temp extends relubrication intervals and has excellent high temperature performance. It has a very high dropping point 536F (280C) and excellent vibration resistance. It reduces grease consumption, maintenance costs and the need for multiple greases. NLGI Grade: 2.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

222 Screwlock Threadlocker

Low strength, replaces nylon/star/spring washers on screws and threaded fitting where easy dismantling is required, e.g. with a screwdriver. NSF P1 registered.

Rustoleum Combi Colour

Long lasting metal protection. Anti-rust primer and topcoat in one. Can be applied direct to rust or bare metal. High coverage: 10.5m2 per litre. Hides blemishes in one coat. Flexible film formula.

Solent? Absorbent Pads

Solent Plus absorbent pads are available in two thicknesses, medium or light and are suitable for use anywhere that fluids have leaked or spilt. Simple colour coding makes selection easy. For most indoor applications use grey/black. These will absorb most fluids, including oils, fuels, solvents, coolants, water and foodstuffs such as milk or wine. If there's a possibility of aggressive fluids such as acids or alkalis being spilt, use the yellow ones. Where an oil or fuel spill is likely outdoors, it's best to put the white ones in place. These repel water while absorbing the oils and fuels.



Chemical/Light Duty
Size: 50 x 40cm
Pack Qty: 200
Absorbs (ltrs): 0.5

LPS® LPS2 Lubricant

The strong, multi-purpose lubricant and penetrant, with added corrosion protection. A non-drying, oily film that loosens rusted and frozen parts. Gives up to 1 year protection. CFC Free. Non-flammable propellant. Non-conductive. Displaces moisture. USDA approved.

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type