Pistol Grip Can Holder & Sprayer

For aerosol sizes 300ml/400ml/500ml cans. Protects hands from cold cans and chemical contact.

RN Metal Markers

Permanent bright opaque markers for most surfaces, whether semi-porous or non-porous. RNM ink penetrates grease, oil and rust to give a waterproof mark which will withstand many kinds of metal processing. The marker comprises a flexible plastic container with a ball valve writing head. Applications include metals, rigid plastics, painted surfaces, wood, stone, asphalt and similar materials. Complete with standard 2.5mm ball heads.

Food Safe White Grease 12.5kg

Intended use for lubrication of bearings, slides and all delicate mechanisms used in the food manufacturing/processing industry. Maximum operating temperature 150C with excellant load carrying capacity and water resistance.
FDA Compliant.
NSF H1 Registered.
Non Toxic.

Drain Covers

When a spill occurs outside, the most likely outlet for fluids to run away to are the drains. It is a legislative requirement that sufficient protection is in place for all at-risk drains. This is best met with one or more drain covers, of which three types are available. The clay drain covers are only for use in an emergency, as once moulded to the drain they cannot be re-used. Where ongoing use is anticipated, such as each time a bulk delivery is made, a polyurethane cover should be used. The neoprene cover (not illustrated) is for occasional use only.

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

Weather Mate Sealant

Weather Mate Sealant is a
multi-use sealant based on an
advanced isocrylic formula
that provides the ultimate in
sealant technology for adhesion
to all surfaces. The product can
be applied in weat weather, to
wet surfaces and even under
water. Adheres to many
problematic surfaces such as
bitumen, lead, galvanised steel
and roofing felts.

SuperLube Grease

Multi-purpose synthetic lubricant with PTFE. Silicone free. H1 approved. Temperature range
-43C to +230C



SuperLube Aerosol Grease: Penetrates, lubricates and cleans. Provides a long lasting barrier of protective grease.

Artline 400XF Paint Markers

Special permanent pigment ink. Valve controlled ink flow with a stroke width of 2 - 4mm. Opaque and weatherproof. Available in black, blue, green, red, white and yellow (singles). White and yellow also available in packs of 12.

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Scotch-Weld 9323 Extreme Strength Epoxy Adhesive

Two part room temperature curing adhesive. Extremely high strength. Toughened epoxy system with good elevated temperature resistance. High environmental resistance. Mixed adhesive is thixotropic for ease of application. High impact resistance.