Castrol Magna Slideway Lubricant Oil

Based on highly refined mineral oils which incorporate tackiness & lubricity additives. Provides smooth slideway movement under heavy loads. Magna BD68 is recommended for horizontal slideways. Magna CF220 is recommended for vertical slideways. Excellent anti-wear properties

Magna BD68 & CF220

Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.

Solent? Layout and Marking

The Solent? range of industrial bullet point markers with liquid paint produce a clear and strong opaque result on any steel, aluminium, rubber, timber, plastic, ceramics and other materials .

Available in a range colours.

Liquid Paint Marker

Bullet tipped. 2.3mm point size.

Rustoleum Combi Colour

Long lasting metal protection. Anti-rust primer and topcoat in one. Can be applied direct to rust or bare metal. High coverage: 10.5m2 per litre. Hides blemishes in one coat. Flexible film formula.

Bostik Bond-Flex Silicone Sealant

Bostick bondflex silicone sealants are a range a sealants, which offer a wide range of applications with a fast cure rate. Exceptional adhesion with excellent temperature and colourfast & UV resistant resistance. Available in a variety of colours.

400LMN Bond-Flex White Silicone Sealant

Single part, low modulus, neutral curing silicone rubber sealant. It cures on exposure to atmospheric moisture to form a resilient highly elastic seal which maintains flexibility over a wide range of temperatures. Unlike many silicone sealants Bondflex 400LMN has a low odour when curing. The sealant is extremely resistant to weathering, ageing and water. Conforms to BS 5889 (A) , ISO 11.600 25 LM and US Food and Drugs Administration regulation No 21CFR 17726 00 brickwork.
Size: 290ml.
Colour: white.

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Tins

510 - Flange Sealant

Recommended for high temperature applications (up to 200C), where maximum solvent resistance is required.
AGA approved No. 2590 up to 6900kPA (100psi).

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.

Brushing High Zinc Content Paint

ZG-90 fast drying rust protection. Ideal for exterior locations where rapid showerproof performance is required. Exceptional corrosion performance.
Meets three national performance standards
ASTMB 117 hot salt spray, BS AU 148:PT 14 (1969) natural weathering, and DIN EN ISO 12944-1 corrosion protection of steel structures.
Size: 500ml.

ZG-90B