Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

Industrial Melting Pots

A range of melting pots which have been designed for industrial melting of waxes, glues and plastics etc., for coating, casting, protecting etc. The pots are electrically heated and thermostatically temperature controlled from 50C to 200C. Constructed from anodised aluminium with ceramic fibre insulation. Pots supplied with 2M cable and fused plug, lifting handle, double-wall heat-conserving lid, on/off switch and safety thermal cut-out. 220/240V as standard.

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Solent? Lubricants Engine Oil

Solent lubricant? Supergrade FS2? is a high performance, semi synthetic, multi-temperature engine oil for all engines including multi valve, fuel injected and turbo charged, it will provide greater protection against engine wear than non-synthetic oil even at motorway speeds.

FS2005 Supergrade FS2? Engine Oil - Semi Synthetic 10W/40

Solent lubricant? Supergrade FS2? refined mineral oil with special multifunctional synthetic additives:
For all petrol, diesel and LPG cars, vans and lorries.
For multi valve, fuel injected and turbo charged performance vehicles.
Can be mixed with other oils.
Assists easy engine starting in cold weather.
Assists in reducing fuel consumption.
Gives far greater protection against engine wear than non-synthetic oil.
Excellent lubricity in all conditions.
Excellent sludge control in "stop-start" urban motoring conditions.
Affords high protection at motorway speeds Increased oil change intervals - change your oil less often.
Meets the performance level requirements for: API/SL/CH-4; Mercedes Benz 227.5; 229.1; 228.0/1; VW 501:01; 505.00, MAN 270/271.

Wash and Wax

Removes ingrained dirt, road and traffic grime while adding active wax protection. Salt free.



Concentrated high performance formula. Offers outstanding value - 1 litre - up to 66 washes. Removes stubborn dirt, grime, and other harmful deposits. Leaves a streak free protective layer of Simoniz wax. Foams instantly in hard or soft water.

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Q8 Cutting Oils

Mineral based neat cutting oil with special non-active sulphur EP additive package, lubricity additive package and mist reducing additive. Recommended for all heavy duty machining operations.

Bach NKM Neat Cutting Oil

XR99 Lubetech 'Highway' Micro Clay Granules - 20ltr bag

Excellent floor coverage. Conforms to AFNOR NF P 90-198, European Road Safety Regulations. Low skid risk during deployment and after clean-up. Highly absorbent calcinated mineral. Absorbs up to 14 litres. 20ltr bag

LPS® 3 Heavy-Duty Rust Inhibitor

M03005
Long term (up to 2 years indoors), heavy-duty corrosion inhibitor that forms a transparent, soft waxy film for protection and lubrication. Does not contain silicones. Qualified to Boeing BMS 3-23 G Type II, Airbus TN A.007.10138 Type 1 Grade 2, DMS 2150, Lockheed G39.2004. Conforms to Mil-PRF-16173E Grade 2, ASTM F-945 and PWA 36604.

Size: 3.78ltr metal tin.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings