Ambersil Food Grade Silicone Lubricant

A high purity, highly concentrated silicone lubricant based upon silicones approved by the FDA and considered safe for applications where incidental food contact may occur. Lubricant is odourless, tasteless, colourless and chemically inert. Ideal for use where high standards of purity are essential.
Suitable as an anti-stick agent on conveyors, labellers, heat sealers and packaging applications. Helps prevent line jams, inhibits adhesive build up on blades and sealers.

Layout Fluid

Industrial methylated spirit based.

Opaque

For use with heavy and black metals. When scribed or scored the dark metal shows up well against the film. Can also be used for colour coding.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

15ltr Clip-Closed Carrier Spill Kit

Contents:
10 x pads.
1 x sock.
1 x disposal bag.

perma CLASSIC Lubricators - 120cc

A single-point lubrication system for roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains, etc. operated at ambient temperatures that reach from 0C. up to +40C.
Typical applications can be found in mining, steel, automotive and mechanical engineering.

Perma® CLASSIC Lubricators must be used with activators which can be supplied to suit differing discharge periods according to individual applications.
1 month discharge period: PTC-729-3600R (Yellow)
3 month discharge period: PTC-729-3600F (Green)
6 month discharge period: PTC-729-3600M (Red)
12 month discharge period: PTC-729-3600H (Grey)
Please Order Separately

3M Scotch - Weld Epoxy Adhesive DP190GY

Flexible two-part adhesive that cures at room temperature and provides high strength bonds with good performance in shear and peel. Bonds rubber, metal, wood, most plastics, and masonry products. Adhesive has a 90 minute work life, with improved impact and shock resistance. Packaged in convenient Duo-Pak cartridges designed for use in the EPX Plus applicator.
Size: 50ml.

Pan Fibre Gland Packing

VT2 is braded from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance without shaft wear problems or high costs of traditional synthetic fibre packing. Extended life even at high shaft speeds and pressures within a wide pH and temperature range.
Applications: Pumps, valves, mixers, reactor vessels and reciprocating applications. Resistant to general chemicals, solvents, oils, water and steam. For use in arduous conditions in process applications where alternative packing causes excessive wear or require frequent maintenance and replacement. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Operational limits
Pressure rating: 100bar
Rotary speed: 18m/s
Temperature: -40C +250C
pH range: 2-14
Roll length: 8m

Type VT2

Petrol Treatment

Cleans and lubricates carburettors and cylinders, when used regularly. Reduces cold start engine wear. Removes fuel-wasting carbon and gum deposits. Improves engine efficiency and petrol consumption. Safe for use with leaded and unleaded petrol. Inhibits rust and corrosion in fuel lines. SSuitable for engines with carburettor's. 50ml treats 50 litres of fuel.

perma FUTURA Lubricators - 100cc

Suitable for single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. This lubrication system is ideal for areas that must be kept hygienically clean. Due to its resistance to corrosion it is especially suited for applications in the food industry.

Perma® FUTURA Lubricators must be used with activators which can be supplied to suit differing discharge periods according to individual applications.
1 month discharge period: PTC-729-3600R (Yellow)
3 month discharge period: PTC-729-3600F (Green)
6 month discharge period: PTC-729-3600M (Red)
12 month discharge period: PTC-729-3600H (Grey)
Please Order Separately

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings