Everbuild 700T Silicone

Silicone 700T is a fast, neutral cure, low modulus sealant specially formulated for the PVCu and roofline industry. For perimeter pointing window and door frames, sealing plastic roofline areas and general weathersealing. Now contains a powerful anti-fungal compound.

700TBK

Solent? Industrial Floor Paint

Solent? Industrial floor paints transform drab, stained or scuffed concrete and similar surfaces. Suitable for floors in warehouses, workshops, shop floors garages,
basements, etc.

Synthetic Resin Based Industrial Floor Paint 5Ltr

Solent? Maintenance floor paint is supplied in 5 Litre tins that will cover up to 8m2 per litre of concrete floor. For the very best results Solent recommend 2 coats are applied to produce an attractive and hardwearing finish. Solent floor paint is easy to use, No primer is required and once dry, it is easy to clean, oil, grease and water resistant. Making it ideal for warehouses, garages and workshops etc.

*Please note, colours are for guidance only.

Pentel Paint Markers

Medium bullet point markers. For use on glass, plastic, rubber and metal etc. 240m writing distance. Available in white and yellow (packs of 4) and assorted pack of 4 (red, green, yellow and white).

perma NOVA Lubricators - 130cc

Especially suited to single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, shaft seals and chains located in areas with considerable temperature variations (e.g. food industry) or where intrinsic safety is a requirement (as in the oil and gas industry). Dust-tight and protected against water jets.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

Zinc Primer

For use on bare steel and galvanised surfaces. Protects from corrosion, chemicals and mechanical wear. 500ml aerosol.

Industrial Rust Not

Rust Not penetrates the surface of the metal to form a permanent bond. Suitable for use on inside or outside projects, to produce a smooth quick drying finish that can be recoated at anytime.

278 High Strength Oil Tolerant Threadlocker

Invented by Henkel Loctite as a revolutionary method to lock and seal threaded fasteners, Loctite Threadlockers have found wide acceptance in a range of applications - from delicate electronic components to heavy construction equipment. Loctite Threadlockers are available in varying viscosities and strengths for virtually any application, including exposure to extreme environments.



High strength threadlocker which can be used on as received parts and on applications where operating temperatures can reach 200C. It is also ideal for use on plated bolts including the new zinc/trivalent chrome finishes.

Pan Fibre Gland Packing

VT2 is braded from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance without shaft wear problems or high costs of traditional synthetic fibre packing. Extended life even at high shaft speeds and pressures within a wide pH and temperature range.
Applications: Pumps, valves, mixers, reactor vessels and reciprocating applications. Resistant to general chemicals, solvents, oils, water and steam. For use in arduous conditions in process applications where alternative packing causes excessive wear or require frequent maintenance and replacement. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Operational limits
Pressure rating: 100bar
Rotary speed: 18m/s
Temperature: -40C +250C
pH range: 2-14
Roll length: 8m

Type VT2

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings