Anti-Seize Compound

Smooth copper containing paste prevents corrosive seizure of screw threads and eases assembly and dismantling of components. Protects against dirt, moisture and chemicals. High temperature performance 1100C.

"Leak Detector" Spray and Fluid

Detects even the smallest leak of potentially dangerous gases. For use on all metals and most plastics.

Rocol Dry Moly Paste

A soft petroleum based paste with high moly content. Can be rubbed, or burnished on to the surface. Provides excellent load carrying. Dry film lubrication. Temperature range up to 450C. Available in 100gm or 750gm.

Z30 Corrosion Protection

Formulated to give an excellent degree of corrosion protection over long periods (up to 2 years). When applied, Z30 leaves a brown waxy film that will displace moisture and perform as a 'non-fling' lubricant. Ideal for long term protection of machinery, elevators, fork-lift trucks, underground installations, off-shore platforms etc.

Gasseal Non-Setting Sealant

An off-white sealant with good sealing properties for use on threaded and face joints.

Sapphire Hi-Load 2

Designed to give protection against high loads and vibration. Contains molybdenum disulphide. Temperature range: minus 30C to plus 150C.

V-Cut SS

Semi-synthetic water mix fluid for all general cutting & grinding operations. Forms translucent green micro-emulsion in water. Excellent corrison protection package. Rationalise to one fluid for cutting & grinding. Low odour- pleasant to use. Economical mix ratio 35:1 - 45:1 in water for cutting, 45:1 - 55:1 for grinding.

Rocol Dry Moly Paste

A soft petroleum based paste with high moly content. Can be rubbed, or burnished on to the surface. Provides excellent load carrying. Dry film lubrication. Temperature range up to 450C. Available in 100gm or 750gm.

Cutting Fluids

High performance semi-synthetic cutting and grinding fluid giving optimum performance at high dilution whilst remaining resistant to bacterial and fungal attack. For a wide range of cutting and grinding operations on most workpiece materials. Recommended dilution between 40:1 and 60:1 for cutting; 50:1 and 70:1 for grinding.

Sapphire 2

High performance, general-purpose grease. Bright blue for easy identification use. High resistance to load, good adhesion properties. Resistant to dust and dirt contamination. For use on ball, roller and plain bearings on a wide range of industrial plant and machinery. Temperature range: minus 30C to plus 150C.