3 Core S-W-A Cable



Black XLPE3X2/5

Stranded plain annealed copper conductors, XLPE-insulated, PVC-bedding, galvanised steel wire armour, PVC outer sheath. Black. 600/1000V grade to BS5467.
Flame propagation to BS EN60332. Temperature limits: -15 to +90°C. Core identification: 3 core - brown, black, grey. 4 core - brown, black, grey, blue. 2.5 - 2,3,4 core also available in white numbered cores to ESI 09-6. Should not be installed at temperatures below 0°C or
bove +60°C.
Bending radius: 6 x overall diameter. Conductor size: 2.5mm2.
Stranding: 7/0.67mm.
No. of cores: 3.
Weight: 343kg.
Overall diameter: 12.99mm.
Gland size: 20S.
Nylon cleat: 0.6mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 6mm

Shape W217. Grade: RA46. Diameter: 25mm. Length: 10mm. Max. rpm: 38,000. Weight per 10: 40g.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.
N.B. - 3mm Shank

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Bosch® 5" Angle Grinders

GWS 11-125
With slim grip.
Rated power input: 1100W.
No load speed: 11,500rpm.
Disc diameter: 125mm.
Wire cup brush: 60mm.
Spindle thread: M14.
Weight: 2.3kg.

Disc supplied separately.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein EDM Hard/Aluminium Oxide.

Specially formulated for EDM scale removal. Length 150mm.

Makita Orbital Jigsaws

4351FCT
Orbital Jigsaw with Tool-less blade fixing and variable speed control. Ergonomic rubberised grip. LED job light. Soft start and constant speed control.

Specifications:
Max cut in wood: 135mm.
Max. in steel: 10mm.
Length of stroke: 26mm.
Strokes per minute: 800-2800spm.
Input wattage: 720W.
Weight: 2.4kg.
Supplied with: Jigsaw blade set (B10 BR13 B22 x 2 each), Hex wrench, cover plate, anti-splinter device.

Available in 240V and 110V.

Bosch Sabre Saw Blades

Bi-metal all-purpose jigsaw blade. Tooth form: milled, side set.
Applications: wood with nails/metal 5 - 100mm, sheet metal, pipes, aluminium profiles 3 - 10mm, plastic profiles diameter 3 - 100mm.
Length: 150mm.
Tooth spacing, progr.: 1.8 - 2.6mm.
TPI progr.: 10 - 14TPI.
Product No. S922VF.

For Wood, Metal & Plastics (Pack 5)

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Short Series

Shank dia.: 19mm/3/4".
Depth of cut: 25mm.
Bore: 6mm.
Overall length: 60mm.

Dronco Flap Discs

Used for descaling and derusting of stainless steel, steel, aluminium and non-ferrous metal. Preparation and finishing of welding seams, preparing of painted surfaces and polishing of stainless steel. For use with a grinder.

Polishing Flap Discs

Available in 2 sizes: 115mm x 22mm and 125mm x 22mm.