SIP 345mm (14") Professional Heavy-Duty Bandsaw

01444
Specifications:
Powerful 2HP motor 230V, 1.5kW.
Throat width: 345mm.
Large tilting table: 10-45.
Table size: 535 x 435mm.
Table height: 1250mm.
Table width: 6-25mm.
Table length: 2750mm.
Saw blade speed: 8 or 14m/sec.
Supplied with blade: 2750 x 12mm x 6TPI.
Max cutting depth: 235mm.
Supplied with floor stand.
2 year warranty.
Weight: 108kg.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

Kennedy® Router Cutters

For panel and edge moulding work, such as table tops and window boards. For use with template guide. 1/4" shank diameter.

2 Flute Rounding Over Bits

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 60 Inc. Angle

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Red Line - Medium

General purpose blades, with medium TPI. For cutting both long grain and cross grain solid wood, giving a good finish.

3M Abrasive Utility Cloths and Sheets

314D
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Sheets

Size: (W)230mm x (L)280mm. Available in several grades.

Cordless Impact Wrench

14.4V impact screwdriver that delivers high torque for excellent performance. Supplied complete with 2 batteries, charger and carry case.

No Load Speed: 2300rpm
Battery capacity: 2.0Ah
Impact rate: 3000bpm
Standard Bolt: M5-M16
Weight: 1.7kg

Bosch Sabre Saw Blades

For fast cuts in thick and thin ferrous and non-ferrous metals, sheet aluminium, pipes and profiles.

For Metal Pack 5

For fast cuts in thin to thick metal plates 1 - 8mm, thin to thick profiles 5 - 100mm diameter
Tooth pitch: 1.8.
Length: 150mm.
Product No. S123XF.

Cordless Impact Wrench

14.4V impact screwdriver that delivers high torque for excellent performance. Supplied complete with 2 batteries, charger and carry case.

No Load Speed: 2300rpm
Battery capacity: 3.0Ah
Impact rate: 3000bpm
Standard Bolt: M5-M16
Weight: 1.7kg

3M Aluminium Zirconia Fibre Discs

581C
A fit for purpose fibre disc for heavy, medium and light grinding applications. Good performance and a consistent quality finish. High performance alumina zirconia (AZ) mineral bonded to a vulcanized fibre backing. Conveniently packaged with 50 discs on a re-usable disc-holder clamping system, for easy storage and retention of disc shape and form. Good performance on stainless and mild steel as well as other ferrous and non-ferrous materials. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 178mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)