Hitachi 115mm (4.1/2") 730W Angle Grinder

High torque design with a slim line grip and side mounted switch. Low gear cover height for easier access to confined areas and fitted with replaceable carbon brushes. Supplied with a side handle, wrench and carry case. Specifications: No-Load Speed: 10000/min. Power Input: 730W. Wheel Diameter: 115mm. Arbor: 22mm. Spindle Thread: M14 x 2. Overall Length: 254mm. Weight: 1.40kg.

Available in 240V and 110V.

G12SR3

338U Plain Stikit™ Sheets

Abrasive C paper backed sheets with a special self adhesive system that ensures the product remains firmly in place whilst in use but is easy to apply and quick to remove. Ideal for intermediate and final sanding on lacquered hard and soft woods, paints lacquers, primers, solid surface materials and plastics.



Plain (no holes)

Kobe? Air Grinders

The Kobe? GD2206L one-handed type straight die grinder?s powerfully compact 1/2 HP motor delivers 22,000 precisely controllable rpm in the palm of your hand making it ideally suitable for polishing, buffing and grinding. The robust and durable single piece aluminium body houses the 1/2 HP motor and precision balanced bearings provide reliability in the most demanding of industrial/automotive applications. The trigger has a safety catch to prevent accidental starts.

Straight Die Grinder

Specifications:
Free speed: 22,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 4CFM*
Overall length: 170mm.
Weight: 0.5kg.
Noise level: 93dB(A).
Sound power: 103dB(A).
Vibration: 5.4m/s.

*Based on a 15 second cycle per minute average use.

Kennedy® Sharpening Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Square Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Inverted Cone

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

2-Speed LXT Drill/Driver - Super Charge

2-Speed LXT Drill/Driver
- Super Charge
No load speed: 1300/400rpm.
Capacities: steel 10mm, wood 25mm.
Battery (Not supplied):
1x 1.5Ah Li-ION.
Charing time: 15min.

Naked tool only - Battery and Charger not supplied.

York? Surface Preparation and Finishing Discs

A complete range of flexible surface preparation discs from coarse grit through to a fine polishing disc allows you to rapidly and consistently achieve the finish you require. Ideal for rust removal, preparing and cleaning welds. The threaded mounting allows rapid disc change when required.

Surface Preparation and Finishing Discs

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W160. Grade: RA80. Diameter: 6mm. Length: 6mm. Max. rpm: 81,000. Weight per 10: 30g.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Rolls

Roll size: (W)50mm x (L)50 Metres. Available in several grades.