York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Flame Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Solaris Lite

Light, compact and portable lighting system with a newly designed lamp head equipped with internal aluminium heat sink system and a polycarbonate front lens, making it extremely strong. It uses 18 High Powered CREE LED?s per head and is enhanced
further by highly advanced optics to give you optimum and incredible light output.


Features:
? Lighting options: High/Low/Flashing
? 5 section extendable mast (360 tilt, 500-1300mm min/max height)
? LED battery status indicator
? Low heat emission and environmentally friendly lighting source
? Weatherproof (IP65)

Specifications:
Charge time: 5 hrs
Battery type: 12V 17Ah (sealed dry lead acid)
Light source: 18x CREE LED
Head size: 300 x 40 x 280 (LxWxH)
Case size: 250 x 180 x 140 (LxWxH)
Running times (hours): High 6, Low 15, Flashing 30
Lumens (High/Low): 3000/1500
Weight: 9.5kg

Paslode Nail/Fuel Packs

To be used with Paslode IM350+ 90mm Gas Framing Nailer.

Kobe Speed Air Ratchets

Suitable for the removal and installation of threaded fasteners when doing automotive and light assembly work. Reversible hardened steel square drive. Rubber handle provides grip and operator comfort with reduced hand chill. Three planetary gears for longer life and smoother running. Rubber cover protects the ratchet head and the workpiece. Short body length allows access into hard to reach areas. Low profile teasing throttle for precise speed control. Rotating rear exhaust with baffle for reduced noise. Rotating air inlet to prevent the air hose tangling. Adjustable air regulator.

Air Ratchet Speed Wrench (3/8?? Square Drive)

FSR375.
Specifications:
Working torque range: 7-27Nm (5-20ft-lbs).
Anvil size: 3/8".
Free speed: 200rpm.
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").
Air pressure: 6.2bar (90psi).
Air consumption: 113Ltr/m (4CFM)*.
Sound power level: 88dB(A).
Sound pressure/noise level: 84dB(A).
Vibration level: 1.8m/s2.
Overall length: 205mm.
Net weight: 640g.

*Based on a 15 second cycle per minute average use.

Kennedy® Abrasive Files

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Round Silicon Carbide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Ball Shape

Cut 6 - Double Cut
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general purpose use.

Kennedy® Economy Emery Cloth

The emery abrasive particles are bonded by a high strength glue to a flexible J-weight blue twill backing cloth. The backing cloth allows the abrasive sheet to conform to the shape of the item being worked on, ensuring the abrasive action is always where you require it. Suitable for general-purpose, light duty workshop use.

Sheets

Can be torn along the grain of the cloth to the size you require to minimise wastage. Sheet size: 230 x 280mm (9" x 11"). Supplied in packs of 50.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

361F Cloth Discs

Tough resin bonded aluminium oxide disc for grinding and stock removal. Applications such as weld grinding and finishing.
Maximum rpm. 25mm Discs = 25000 rpm.
38,50 & 75mm Discs = 20000 rpm.

Hitachi NiCd Batteries

Least expensive cell technology. Has the least temperature sensitivity of the three battery types. A large number of charge cycles is possible.

EB24B Battery 24V 2.0AH NiCd Cassette

Charger compatibility: UC24FYA.
N.B. Picture is for illustrative purposes only. Actual product may vary in appearance.

York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 20mm Height 12,300 MOS (rpm)